Ui Flow support for onewire and ds18x20
fb24 last edited by fb24
onewire and ds18x20 seem not being supported in Ui Flow Micropython. Does anyone know how to integrate onewire and ds18x20 libraries?
@fb24 UIFlow don't provide third-party Unit or sensor block yet. if your sensor is use I2C protocol , you could use the I2C block to communication.
hey @fb24 onewire and ds18x20 are only supported in micropython version 1.12 uiflow micropython is based on version 1.11 if you are familiar with micropython I suggest you flash your M5Stack device with the latest micropython, I did a short video series on how to use M5Atom with micropython 1.12 and I will be doing some videos shortly on how to use other M5Stack devices with micropython 1.12
robalstona last edited by
here you have the library to support ds18b20. You would have to copy these files to your device and from UiFlow call the appropriate micropython commands using the blocks Advanced -> Execute -> Execute code:
fb24 last edited by
@m5stack Thanks a lot for your advice