<![CDATA[I2c Geiger Counter for Core-S3]]>Does anyone know if such an add-on exists for Core-S3?

]]>https://community.m5stack.com/topic/7816/i2c-geiger-counter-for-core-s3RSS for NodeSun, 15 Mar 2026 19:59:19 GMTSun, 14 Sep 2025 04:40:35 GMT60<![CDATA[Reply to I2c Geiger Counter for Core-S3 on Mon, 15 Sep 2025 12:14:33 GMT]]>@holofloh

Thank You,
Rob

]]>https://community.m5stack.com/post/29946https://community.m5stack.com/post/29946Mon, 15 Sep 2025 12:14:33 GMT<![CDATA[Reply to I2c Geiger Counter for Core-S3 on Mon, 15 Sep 2025 11:50:36 GMT]]>You may look for something like this: https://www.tindie.com/products/climateguard/dosimeter-with-i2c-radsens-arduino/

]]>https://community.m5stack.com/post/29945https://community.m5stack.com/post/29945Mon, 15 Sep 2025 11:50:36 GMT<![CDATA[Reply to I2c Geiger Counter for Core-S3 on Mon, 15 Sep 2025 05:52:06 GMT]]>@rwp908 I do not know any existing. But you can use any Geiger counter kit e.g. equiped with a SBM20 tube or similar that has a pulse output and just use the S3 to count those pulses.

]]>https://community.m5stack.com/post/29944https://community.m5stack.com/post/29944Mon, 15 Sep 2025 05:52:06 GMT