<![CDATA[Looking for the Base Firmware for Unit-V]]>I'm looking for the Base Firmware for Unit-V, I was experimenting and have made a mistake with the unit-v and would like to know where I can get the base firmware so I can reflash to its default.

Thanks

]]>https://community.m5stack.com/topic/1875/looking-for-the-base-firmware-for-unit-vRSS for NodeMon, 13 Apr 2026 05:17:59 GMTTue, 21 Apr 2020 07:29:04 GMT60<![CDATA[Reply to Looking for the Base Firmware for Unit-V on Fri, 24 Apr 2020 01:51:56 GMT]]>the M5StickV/UnitV burn firmware tutorial

https://docs.m5stack.com/#/en/quick_start/m5stickv/m5stickv_quick_start

]]>https://community.m5stack.com/post/8331https://community.m5stack.com/post/8331Fri, 24 Apr 2020 01:51:56 GMT<![CDATA[Reply to Looking for the Base Firmware for Unit-V on Wed, 22 Apr 2020 14:27:06 GMT]]>Esptool can't flash it, its not an esp chip
You need stickV burner from guides section

https://docs.m5stack.com/#/en/core/m5stickv

EasyLoader is

]]>https://community.m5stack.com/post/8318https://community.m5stack.com/post/8318Wed, 22 Apr 2020 14:27:06 GMT<![CDATA[Reply to Looking for the Base Firmware for Unit-V on Tue, 21 Apr 2020 10:41:17 GMT]]>Is there a correct way to flash the firmware using esptool i'm using esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 115200 write_flash -z 0x1000 M5StickV_Firmware_v5.1.1_beta.kfpkg becuase even though it seems to flash I cannot connect with Maixpy i'm getting the following Connect fail, board ide mode no ack

Any tips would be appreciated.

thanks Kyle

]]>https://community.m5stack.com/post/8285https://community.m5stack.com/post/8285Tue, 21 Apr 2020 10:41:17 GMT<![CDATA[Reply to Looking for the Base Firmware for Unit-V on Tue, 21 Apr 2020 07:32:15 GMT]]>http://community.m5stack.com/topic/1872/m5stickv-firmware_v5-1-1_beta

]]>https://community.m5stack.com/post/8282https://community.m5stack.com/post/8282Tue, 21 Apr 2020 07:32:15 GMT