<![CDATA[M5Stack after loading the program is still restarting.]]>I have M5Stack.
When I compile my program for Arduino 1.8.12, windows 7 32 bit and I do download with G0 = gnd with a speed of 115200, the program restarts in a circle.
Other speeds don't work.
below the log from the terminal

rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8

M5Stack initializing...<0><0><0><0><0><0><0><0><0>
Booting device...
Reading settings from eeprom.
Settings not found. Initialization.
Settings saved to eeprom.
Init TFT display
merged:6101FFF8000009285A3B0648030000B4179D763404080805000000
merged:62B002E0000000FFB400330B0000000000000000
Start BLE with PIN auth
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8

M5Stack initializing...<0><0><0><0><0><0><0><0><0>
Booting device...
Reading settings from eeprom.
Settings not found. Initialization.
Settings saved to eeprom.
Init TFT display
merged:6101FFF8000009285A3B0648030000B4179D763404080805000000.........

]]>https://community.m5stack.com/topic/2052/m5stack-after-loading-the-program-is-still-restartingRSS for NodeFri, 06 Mar 2026 06:23:02 GMTThu, 18 Jun 2020 13:14:07 GMT60<![CDATA[Reply to M5Stack after loading the program is still restarting. on Sat, 20 Jun 2020 15:28:47 GMT]]>Problem has been solved
The weak USB cable was to blame, after replacing the cable with the original Samsung, the problem did not return.
Problem messages are:
"BrownOut detector was triggered" and
"The Guru Meditation" something like Blue screen of Death (BSOD)

]]>https://community.m5stack.com/post/9068https://community.m5stack.com/post/9068Sat, 20 Jun 2020 15:28:47 GMT<![CDATA[Reply to M5Stack after loading the program is still restarting. on Fri, 19 Jun 2020 15:22:57 GMT]]>after download m5stack-ble black box is resrating in loop with register dump.

Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
M5Stack initializing...OK
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x4010512d PS : 0x00050031 A0 : 0x4008565c A1 : 0x3ffbe360
A2 : 0x00000000 A3 : 0x3ff48044 A4 : 0x800e04be A5 : 0x400916e8
A6 : 0x00000000 A7 : 0x40085fb0 A8 : 0x00000000 A9 : 0x3ffbb700
A10 : 0x00000000 A11 : 0x3ffbbd60 A12 : 0x800e04b3 A13 : 0x3ffbc010
A14 : 0x00000000 A15 : 0x3ffbc03f SAR : 0x00000016 EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Core 0 was running in ISR context:
EPC1 : 0x4010512d EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000

Backtrace: 0x4010512d:0x3ffbe360 0x40085659:0x3ffbe380 0x40185037:0x3ffbc060 0x400e1a02:0x3ffbc080 0x40090745:0x3ffbc0a0 0x4008ef51:0x3ffbc0c0

Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
M5Stack initializing...OK
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x4010512d PS : 0x00050031 A0 : 0x4008565c A1 : 0x3ffbe360
A2 : 0x00000000 A3 : 0x3ff48044 A4 : 0x800e04be A5 : 0x400916e8
A6 : 0x00000000 A7 : 0x40085fb0 A8 : 0x00000000 A9 : 0x3ffbb700
A10 : 0x00000000 A11 : 0x3ffbbd60 A12 : 0x800e04b3 A13 : 0x3ffbc010
A14 : 0x00000000 A15 : 0x3ffbc03f SAR : 0x00000016 EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Core 0 was running in ISR context:
EPC1 : 0x4010512d EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000

Backtrace: 0x4010512d:0x3ffbe360 0x40085659:0x3ffbe380 0x40185037:0x3ffbc060 0x400e1a02:0x3ffbc080 0x40090745:0x3ffbc0a0 0x4008ef51:0x3ffbc0c0

Rebooting...
ets Jun 8 2016 00:22:57

]]>https://community.m5stack.com/post/9053https://community.m5stack.com/post/9053Fri, 19 Jun 2020 15:22:57 GMT<![CDATA[Reply to M5Stack after loading the program is still restarting. on Fri, 19 Jun 2020 11:34:05 GMT]]>I have m5Stack, a small black box with three silver keys and a TFT LCD display.
I can't load anything into m5sstack if I don't give G0 then GND.
I use 7 Pro x32 Win and I use Arduino 1.8.8 or 1.812.
I don't know any other way to program m5Stack under Windows

]]>https://community.m5stack.com/post/9049https://community.m5stack.com/post/9049Fri, 19 Jun 2020 11:34:05 GMT<![CDATA[Reply to M5Stack after loading the program is still restarting. on Fri, 19 Jun 2020 08:18:33 GMT]]>@spairo why you connect the G0 --> GND ？and which device are you use? M5Stack download program don't need G0-->GND. it differ other dev board

]]>https://community.m5stack.com/post/9046https://community.m5stack.com/post/9046Fri, 19 Jun 2020 08:18:33 GMT