Windows 10 computer. When I plug in the Atom, Windows sees it, and sets up a COM port (COM4).

But I cannot seem to get the ATOM into download or setup mode.

If I hold the button down while plugging it in, the display is blue.

If I do NOT hold the button down while plugging it in, the display is green.

But no matter how long I hold it down, it never turns yellow.

Nor does it show up as an access point.

When I try the burn program, I get this in the console log:

Start Burn

--chip esp32 --port COM4 --baud 921600 --before default_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x3ff000 C:\Users\Nicholas\Downloads\M5Burner\packages\fw\other\wifi.bin 0x1000 C:\Users\Nicholas\Downloads\M5Burner\packages\fw\atom\UIFlow-v1.6.5-matrix.bin

esptool.py v2.5.0
Serial port COM4
Connecting...
.

Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash
MAC: 50:02:91:8e:d7:c4
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...

A fatal error occurred: Timed out waiting for packet header

Burn Failed