<![CDATA[How to erase M5Stick-C completely?]]>I have a M5Stick-C and played around with it a while. I flashed it with UI Flow 1.7.2 and tried to flash with 1.4.5 after that. It doesn't work I get the message that it doesn't have enough memory. Even the Sketch "Factory Test" isn't flashable using Arduino IDE: Not enough memory! I tried to erase the chip with M5Burner 2.2.4 and got the following message:

Erase now

esptool.py v2.5.0
Serial port /dev/tty.usbserial-FD51B432F3
Connecting....
Detecting chip type... ESP32
Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse
MAC: 24:a1:60:54:44:dc
Uploading stub...
Running stub...
Stub running...
Erasing flash (this may take a while)...
Chip erase completed successfully in 2.0s
Hard resetting via RTS pin...

Erase Successfully

It seems to be ok but the result is as before. How can I erase the chip COMPLETELY?

]]>https://community.m5stack.com/topic/3038/how-to-erase-m5stick-c-completelyRSS for NodeSun, 15 Mar 2026 02:39:28 GMTWed, 03 Mar 2021 20:32:01 GMT60