<![CDATA[Can't program M5Stack Core2 with USBv1.2 module, wrong boot mode detected 0x17]]>Hi,

Using Arduino IDE I am able to program hello example program with M5Stack Core 2 for AWS and M5GO Bottom2 for AWS connected.

However, with M5Stack Core 2 for AWS and USB v1.2 module. I get error "Failed to connect to ESP32: Wrong boot mode detected (0x17)! The chip needs to be in download mode".

How do I solve this problem?

Regards,
Markel

]]>https://community.m5stack.com/topic/6468/can-t-program-m5stack-core2-with-usbv1-2-module-wrong-boot-mode-detected-0x17RSS for NodeTue, 17 Mar 2026 09:40:45 GMTTue, 14 May 2024 05:32:24 GMT60<![CDATA[Reply to Can't program M5Stack Core2 with USBv1.2 module, wrong boot mode detected 0x17 on Tue, 14 May 2024 06:11:31 GMT]]>It still happens. Any permanent solution to the problem>

]]>https://community.m5stack.com/post/25216https://community.m5stack.com/post/25216Tue, 14 May 2024 06:11:31 GMT<![CDATA[Reply to Can't program M5Stack Core2 with USBv1.2 module, wrong boot mode detected 0x17 on Tue, 14 May 2024 05:42:29 GMT]]>The cause of the problem is that I selected GPIO0 as SPI slave select at USBv1.2 module.

Regards,
Markel

]]>https://community.m5stack.com/post/25215https://community.m5stack.com/post/25215Tue, 14 May 2024 05:42:29 GMT