<![CDATA[SDCard not working after UIFlow 1 -> UIFlow 2 upgrade ? (M5Stack Fire)]]>I had a M5Stack Fire with UiFlow 1.0 and a working program that uses the SD Card, after upgrading to UIFlow 2 (last try with 2.1.5) I am not managing to make the SD Card work.
listdir("/") only shows /system and /flash.
Trying /sd gives an ENODEV. Trying to initialize the SDCard gives either an RGB light turning green (thus not right pins), or an ESP_ERR_INVALID_STATE if I try the suggest sdcard.SDCard(slot=2, width=1, sck=18, miso=19, mosi=23, cs=4, freq=1000000) initialization from UIFlow.

Some posts indicate that SDCard on UIFlow is not working since April 2024
https://community.m5stack.com/topic/2990/m5paper-sdcard-access/10

How to get SDCard working on UIFlow?

]]>https://community.m5stack.com/topic/6887/sdcard-not-working-after-uiflow-1-uiflow-2-upgrade-m5stack-fireRSS for NodeMon, 16 Mar 2026 21:04:49 GMTSat, 12 Oct 2024 23:21:55 GMT60<![CDATA[Reply to SDCard not working after UIFlow 1 -> UIFlow 2 upgrade ? (M5Stack Fire) on Tue, 22 Oct 2024 08:15:51 GMT]]>@rodrigob This issue has been fixed in uiflow 2.1.6.

]]>https://community.m5stack.com/post/26816https://community.m5stack.com/post/26816Tue, 22 Oct 2024 08:15:51 GMT