<![CDATA[M5burner not working]]>When i first opened the box and connected the product (dial), i installed the M5burner and installed a system. When i wanted to change systems after that, it just said: "--chip auto --port COM18 --baud 1500000 --before default_reset write_flash -z 0x000 C:\Users\kary7\Downloads\M5Burner-v3-beta-win-x64\packages\firmware\6281119d9035fe676ae6844558047cdf.bin
esptool.py v4.10.0
Serial port COM18
Connecting...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

A fatal error occurred: Failed to connect to Espressif device: Invalid head of packet (0x08): Possible serial noise or corruption.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html"

]]>https://community.m5stack.com/topic/8179/m5burner-not-workingRSS for NodeFri, 10 Apr 2026 13:26:04 GMTWed, 08 Apr 2026 16:57:10 GMT60<![CDATA[Reply to M5burner not working on Thu, 09 Apr 2026 08:28:00 GMT]]>@GiovanniCaenazzo
disconnect M5Dial
press and hold boot button at the back ofM5Dial - in the middle of Stamp Controller - it is very gentle switch
connect M5Dial to USB
M5Burner should detect com port in boot mode

]]>https://community.m5stack.com/post/30874https://community.m5stack.com/post/30874Thu, 09 Apr 2026 08:28:00 GMT