I just got the M5Stack CoreS3 SE and I'm having nothing but problems with it. I'm not sure if I'm doing something wrong, or if the unit I got is defective in some way.
Out of the box, when I plugged it in, the demo app was working fine. I could see available Wi-Fi networks, draw on the screen in the Touch app, see the waveforms from the microphones, etc.
I have Arduino 2.3.4 on a MacBook Air M2 running macOS Sequoia 15.3. I installed the M5Stack board manager 2.1.3 and the M5CoreS3 library 1.0.0 (and all its dependencies). I tried to upload the sketch under Examples > M5CoreS3 > Basic > display.
When I plug the unit in or press the reset button, the sketch appears to run for a split second, and then the screen goes blank (or occasionally, it displays different coloured vertical bars). This happens whether I plug it in to my computer or to a USB wall adapter, with different cables. However, I discovered that if I change the CPU frequency from 240 MHz to 160 MHz under the Tools menu, this sketch runs normally.
Other things I have tried to install don't work at all, with the screen simply remaining black. This includes using the m5burner application to try and re-install the CoreS3SE UserDemo.
Anything else I can try, or should I be asking for a refund?