Is there any change to get Unit GPS + Unit LoRaWAN 868 running together in UIflow?

Is there any change to get Unit GPS + Unit LoRaWAN 868 running together in UIflow?

Wher can I find version 1.8.0?

I have also no chance with Arduino and UIFlow :(

I get GPS informations with the Easy Loader Firmware.

I have the same problem ...

@justin Thank you, I will give this a try.

A new version of the firmware is comming soon ...

https://community.m5stack.com/topic/3321/unit-v2-connection

You can find the latest firmware in the docs:

https://docs.m5stack.com/en/quick_start/unitv2/update

There are more problems without "root" :(

unitv2% date -u 060511102021
date: can't set date: Operation not permitted
Sat Jun 5 11:10:00 UTC 2021
unitv2% date
Thu Jan 1 00:18:32 UTC 1970

unitv2% ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:30:1b:ba:02:db brd ff:ff:ff:ff:ff:ff
inet 10.254.239.1/24 brd 10.254.239.255 scope global eth0
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
link/ether 00:e0:4c:05:22:59 brd ff:ff:ff:ff:ff:ff
4: wlan1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
link/ether 02:e0:4c:05:22:59 brd ff:ff:ff:ff:ff:ff
inet 10.254.239.1/24 brd 10.254.239.255 scope global wlan1
valid_lft forever preferred_lft forever