pm2.5 and mqtt incomplete python code

  • Before I go into describing the bug I ran into I want to make a request that the pm2.5 blocks includes temperature and humidity values from the sensor. Now onto the issue:
    I am using uiflow with pm2.5 and mqtt blocks. I start off with some block code for the pm2.5 that is working well but when I try to add the mqtt blocks the generated python code is incomplete and it doesn't include the mqtt python code even when there are mqtt blocks. Sometimes, depending on the sequence of when I add the mqtt blocks it will even remove previously generated python code that was and should still be there. If I then try and go back from the python tab to the blocks tab uiflow will lock up and I then need to reload the m5f file. I can get the code to work by typing it into the python editor but I can't get it working using blocks. Here is the file with the blocks and you can see the incomplete python code it generates. I am using 1.3.4 beta pm25 m5f on github

    Here is the working python code that I manually typed into the python editor tab.

    from m5stack import *
    from m5ui import *
    from uiflow import *
    import module
    from m5mqtt import M5mqtt
    import unit
    m5mqtt = M5mqtt('xxx, '', 1883, 'xxx', 'xxx', 3000)
    pm0 = module.get(module.PM25)
    i = None
    ioTopics = None
    xPos = None
    yPos = None
    pmText = None
    pmVal = None
    xPos = 5
    yPos = 16
    def upRange(start, stop, step):
      while start <= stop:
        yield start
        start += abs(step)
    def downRange(start, stop, step):
      while start >= stop:
        yield start
        start -= abs(step)
    pmText = ['SPM 1.0', 'SPM 2.5', 'SPM 10', 'APM 1.0', 'APM 2.5', 'APM 10', '# >  0.3 um', '# >  0.5 um', '# >  1.0 um', '# >  2.5 um', '# >  5.0 um', '# > 10.0 um']
    i_end = float(len(pmText))
    for i in (1 <= i_end) and upRange(1, i_end, 1) or downRange(1, i_end, 1):
      lcd.print(pmText[int(i - 1)], xPos, (yPos * i), 0xffffff)
    #ioTopics = topic_data
    #i_end2 = float(len(ioTopics))
    #for i in (1 <= i_end2) and upRange(1, i_end2, 1) or downRange(1, i_end2, 1):
    #  lcd.print(ioTopics[int(i - 1)], 150, (yPos * i), 0xffffff)  
    while True:
      pmVal = [pm0.get_pm1_0_factory(), pm0.get_pm2_5_factory(), pm0.get_pm10_factory(), pm0.get_pm1_0_air(), 
      pm0.get_pm2_5_air(), pm0.get_pm10_air(), pm0.get_num_above_0_3(), pm0.get_num_above_0_5(), 
      pm0.get_num_above_1(), pm0.get_num_above_2_5(), pm0.get_num_above_5(), pm0.get_num_above_10()]
      i_end2 = float(len(pmText))
      for i in (1 <= i_end2) and upRange(1, i_end2, 1) or downRange(1, i_end2, 1):
        lcd.print(pmVal[int(i - 1)], (xPos + 130), (yPos * i), 0xffffff)