RA08 loRa module with GPS module?
I'd like to use this RA08 LoRa module
I can't find a pinout for it, is it developed by a third party?
I'd like to use it with this GPS module https://m5stack.com/collections/m5-module/products/gps-module
Is that possible without soldering?
Part number is actually Ra-01H
We found the pinout
If anyone has this LoRa module and could test it that would be great. I'm waiting for mine to arrive.
Seccie last edited by
I have the Lora868 module;
Just a quick word of advice, if you want to use the module with the LMIC library then you -as mentioned in the article you pointed out to- have to solder the DI0 1 pad of the RA-01 to pin 34 of the M5stack connector.
The pin-out for the Lora868 module:
MISO - 19
MOSI - 23
SCK - 18
NSS - 05
RESET - 26
DIO 0 - 36
DIO 1 - 34 <-- this one is NOT connected when you get your Lora868 module, soldering needed!
If you want to know the physical pinout of the RA-01 (https://docs.ai-thinker.com/_detail/lora/spec/ra-01_picture.png?id=lora)