GoPlus2 2x DC Motor Cable connector type please
-
Flyer states XH2.0-2P, but I cannot confidently locate or source.
Could they be XH2.54-2P/XH2.5-2P? Or maybe a PH2.0-2P?
Dimensions seem more like XH
-
@gavin67890 "Could they be XH2.54-2P/XH2.5-2P?" the 2.54 and 2.5 is the pin spacing, so you can rule them out! The old DIP IC package was 0.10 inches (2.54mm).
Here is the DigiKey page for JST:
https://www.digikey.ca/en/product-highlight?f=1315853904&f=1972742469
Both PH and XH are listed with specs, so you can see how they differ.
-Terry
-
Hi @teastain,
Cool, thanks. I went ahead and ordered at risk JST XH 2-pin from Adafruit, 2.5mm seems spot on for the connectors of GoPlus2. http://adafru.it/4872
