Forum Rules (!!!!READ THIS FIRST BEFORE POSTING!!!!)

• 

  FORUM RULES (!!!!READ THIS FIRST BEFORE POSTING!!!!)
  • lukasmaximus

  2
  1
  Votes
  2
  Posts
  10467
  Views

  B

  Hello @lukasmaximus, For those not familiar with the Markdown ... Snippets code example here is an example code. ``` // this area is nested 3-backticks code block. const hello = "hello"; ``` Notes : To mark the block, don't forget line breaks after ``` You can use to ... ~~~ Result, after Copy/Paste to the left window :
• A

  How to make a smaller .bin?
  • aezero

  5
  0
  Votes
  5
  Posts
  1877
  Views

  F

  1.M5Stack.Lcd use Brightness (0: Off - 255:Full) https://github.com/m5stack/m5-docs/blob/master/docs/en/api/lcd.md#setbrightness https://github.com/Bodmer/TFT_eSPI#tips or 2.edit User_Setup.h or rename // ######################################################## // Section 2. Define the pins that are used to interface with the display here //####################################################### // If a backlight control signal is available then define the TFT_BL pin in Section 2 // below. The backlight will be turned ON when tft.begin() is called, but the library // needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be // driven with a PWM signal or turned OFF/ON then this must be handled by the user // sketch. e.g. with digitalWrite(TFT_BL, LOW); #define TFT_BL 32 // LED back-light control pin #define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW)
• T

  Screen freezes after tapping button servo (after servo working once) with GoPlus2 on M5Stack Core2
  • Trevman

  2
  0
  Votes
  2
  Posts
  1155
  Views

  

  Hello @Trevman I am afraid M5Core2 and GoPlus2 are not fully compatible. Please see this thread. Thanks Felix
• K

  Charging battery via external 5V power source?
  • krazik

  1
  0
  Votes
  1
  Posts
  1808
  Views

  No one has replied

• S

  Changing font doesn't take any visual effect
  • snietura

  1
  0
  Votes
  1
  Posts
  2161
  Views

  No one has replied

• M

  How to connect ENV2 and Relay
  • mifi

  1
  0
  Votes
  1
  Posts
  3886
  Views

  No one has replied

• E

  This topic is deleted!
  • emmasmith7052

  1
  0
  Votes
  1
  Posts
  43
  Views

  No one has replied

• 

  Forum Avatars or (those little pictures on the left.)
  • ajb2k3

  1
  0
  Votes
  1
  Posts
  4575
  Views

  No one has replied