My board was defect, I changed the MotionBase , now it is working perfectly.

Yes, it works! Thanks!

DARKGREY works, GREY not. Thanks!

Hello @learly6 no, you don't need a softI2C library. The ESP32 in the M5Stack device already takes care of that for you. You can select almost any two pins to be used for I2C. This tutorial explains it quite nicely. Thanks Felix

Hello @jterrell not sure if this documentation contains all M5Paper Arduino functions, but it is a start. Thanks Felix

Hello@F3l1x In the example below I am using lcd-image-converter. lcd-image-converter https://sourceforge.net/projects/lcd-image-converter/ Select 8bit or 16bit for Block size and create xxx.c. Use M5.Lcd.pushImage(x,y,imgWidth,imgHeight,(unit16_t *) xxx); M5Stack Community : M5StickC Nixie tube Clock ( 2019.06.06 ) https://forum.m5stack.com/topic/1087/m5stickc-nixie-tube-clock Original text： M5StickC Nixie tube Clock https://macsbug.wordpress.com/2019/06/06/m5stickc-nixie-tube-clock/ UIFlow：( jpg ) @world101 implemented a Nixie tube clock in the uiFlow IDE for M5 Stick C-Plus devices. https://github.com/bstein2379/M5StickC-Plus-Nixie-clock Reference material： M5STICKC's DISPLAY analysis part 3 drawn know -how https://lang-ship.com/blog/work/m5stickc-display3-m5lcd/ Lang-ship's image code conversion site : https://lang-ship.com/tools/image2data/

Ahhh - ok: "//waitForSync（）;" 👍

Ok, Solved. On cleared Arduino IDE, I install no M5Stack library, but "Unified M5Stack". And ONLY M5Stack boards. And other my modules ESP32 - WROOM, MH ET mini kit, Wemos D1 I can programing as "M5Stack ESP32" and its work without any other ESP32 boards and libraries.

Thank you, you are brilliant. It is not the answer I was looking for, but thanks for explaining. I hope the world has more people like you who are willing to help a beginner. I want to be creative with technology, but don't want to be a engineer.

@felmue Thank you for the explanation and the link :)

Thanks a lot, Félix. I was concentrated on a big file and did not notice this . Regards Alain Hamradio F1CJN

Hello @jcarolinares in case you are still looking for a solution. I've received my gesture unit and did a quick test. The library allows to pass the Wire1 instance so it's quite straight forward. See example here. Thanks Felix

this issue fixed itself and has not reoccurred. I might have had the libraries or board set up incorrectly. It now works fine in Arduino IDE & VSCode + PlatformIO

@ChrisZang thanks for the reply. The problem is that will only set up the time and DST offset if I request the time from the NTP server. When a DST transition occurs sometime later the clock will not automatically adjust without doing another request from the NTP server. I have solved the problem by simply adding the code to advance or retard the clock at the appropriate time based on my timezone. i.e. first Sunday in April at 03:00 I change the clock to 02:00 and the first Sunday in October at 02:00 I change the clock to 03:00.

@felmue Thank you for the quick reply. Yes, it works perfectly. :)

👍Thank you!

I tried to make the arduino ide executable for the m5stack at the same time - Windows or Linux . It worked now on linux mx.👍