Bala2 - Getting started with example
-
Hi,
I try the example available on m5stack GitHub (https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Application/Bala2) without success. I build project from Arduino IDE and from plaformIO with the same issue. After download binary file on bala2, screen remains black and motors are turned off. I can just do gyroscope calibration when btnB is pressed at power on. With verbose log enable, there is following error: "getBytesLength(): nvs_get_blob len fail: angle NOT_FOUND "
Please let me known how I can solve problem, all framework and libraries seem to be updated.
Regards, Mickaël
-
Thanks to @MattM who solve problem in Bala2 example code will compile but running the code does not progress past calibration. <SOLVED>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login