M5Stick C dead after less than 1 week of use!
-
just stopped working in middle of flashing.
does not power up on battery of usb power, port is no longer detected on pc when device is connected,
connecting gpio0 and 3.3v does not make a difference...
what should i do? -
Plug the usb cable into a usb supply and wait for about 3 to 6 hours. The battery protection may have triggered and shut down the stickC.
Bricking the StickC is almost impossible as you just click the erase button to wipe the stickC before clicking burn to add firmware.
-
Just to be sure, try another USB cable. I've gotten a bad cable or two.
-
it works! thanks =)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login