How to power M5Stack Core 2.
-
Hello everybody, I'm working in a project with this amazing MCU and I have one question.
The project consist in a system remotely programmable so I'm using the LAN module K012-B.
As you know, this module have an addicional input supply. The question is the following. Can I power all the system by this way and if I need to reprogramming be able to connect the USB port ? The 2 at the same time. I look the schematic but I doesn't find any protective diode.
Thank you.
Rob -
Hello @Robertolo
if you look at the M5Core2 schematic in the top left corner you'll find AXP192 and its inputs ACIN (connected to USB_5V) and VBUS (connected to BUS_5V). USB_5V comes from USB and BUS_5V comes from the LAN module.
The AXP192 automatically switches between the available power sources and picks the one best suitable. Please also check the AXP192 datasheet.
Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login