No more than 10 mqtt publish messages per second possible
-
I am using the mqtt library under UIFlow V1.7.5 to publish the IMU data from an M5STickC Plus and also from M5Stack Fire.
On both devices I cannot publish more than about 9 mqtt messages per second, even if I make the delay between the publish-commands to less than 100 ms, say 50 ms or even no delay at all.
Why is this so slow? When I use C++ directly on an ESP32 I can easily publish several 100 msgs per second.
Is there a way to speed this up?
The way it is now the incoming data is too granular and not useful.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login