Hello may i know how to resolve this error
-
Arduino: 1.8.16 (Mac OS X), Board: "ESP32 Pico Kit, Default, 921600, None"
Sketch uses 273310 bytes (20%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15384 bytes (4%) of dynamic memory, leaving 312296 bytes for local variables. Maximum is 327680 bytes.
esptool.py v3.0-dev
Serial port /dev/cu.usbserial-2552473181
Connecting.....
Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 94:b9:7e:ad:24:10
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...A fatal error occurred: Timed out waiting for packet header
A fatal error occurred: Timed out waiting for packet headerThis report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences. -
cu.usbserial is not the correct device. have you installed the cp2102 vcp driver?
-
try to use 115200 baud rate?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login