Servo2 - Servo position
-
I'm currently testing the Servo2 module and found a problem with the positioning of the servo.
With Servo2 the center position seems to be at 100° and not at 90° as in the older Servo module. I've checked this with different servos.
It seems also that the lowest pulse width provided by Servo2 is lower than 500 micros (nomally the range should be 500 to 2500 micros)
Is there any chance to fix this?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login