Timer Camera X - Burning
-
I recently purchased a couple of m5 timer camera X's. I am new to m5stack. though I have been programming ESP32's for around a year using ESP/IDF VSCode on Linux . I have developed software for the esp32-cam AI thinker and other espressif boards.
I was able for get the camera running after setting the wifi supplicant using the windows based camera tool.
I tried to set the m5 cam x's esp32 into flash mode for esp flashing with idf, but that does not seem to work for this device. Tried the two buttons in various sequences. No luck.
So, I downloaded the m5 burner, and was able to erase the device. On boot I now get
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
invalid header: 0xffffffff
...I tried burning packages/fw/timercam/TimerCam-v1.0.bin , but get the following error:
(node:11227) UnhandledPromiseRejectionWarning: Error: ENOENT: no such file or directory, open '/home/david/projects/m5stack/M5Burner_Linux/packages/fw/other/timercam.cfg'
Questions:
Can I set the m5 camera x device into flash mode so I can use esp-idf tools?
Where can I find timercam.cfg?
What baud rate should I use?Thanks,
David
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login