Core2 Screen Blank - 5March2023
-
I have two new M5StackCore2 devices; and the screen has gone blank on one unit after I loaded the Demo program.
I was able to use M5Burner to burn UIFlow_Core2 and to try some simple UI_Flow blockly programs successfully. I was able to program ButtonA and ButtonB to show different messages on the screen.
I tried to download the demo program and my Core2 screen went blank.
I have tried the following fixes unsuccessfully:
- used M5Burner to erase flash and burn a new copy of UIFlow_Core2
- used M5Burner to erase flash and load Core2FactoryTest (I read on the forum that can be a problem)
- used M5Burner to load M5Core2TouchPanelRecovery (my screen was blank, so I had to blindly use the power button to go through the two selections to write new model FW)
At this point I can write small blockly test programs that use Button A and Button B to cycle the vibrator on and off - which seems to imply everything else is working. However if I add a simple block to write a single label to the screen, I see nothing on the display (and the button test code will stop working to use Button A/B to cycle the vibrator).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login