Cannot Upload UIFlow 2.0 beta 14 to new CoreS3: "Error - Invalid Chip" !!!
-
on a new CoreS3, after 3 seconds press on restart button, and after getting green light shortly, with M5Burner 3.0, I then try to upload UIFlow 2.0 beta 14 (or beta 13) dedicated to the CoreS3, and I get a message "Error - Invalid Chip"
Does someone else also encounter that problem?
Is the CoreS3 defective (despite the demo app works good...)
I get report from CoreS3 Touch Panel Hot-Fix firmware below:
M5CoreS3 TP FW Information
regA1 Lib Version: 0x3008
regA3 ChipVendorID: 0x64
regA6 Firmware ID : 0x05
regA8 CTPMVendorID: 0x02Thanks for feedback
Pascal
-
You need to erase the firmware first before burning.
Please don’t double post
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login