Unknown board ID 'm5stack-stamps3'



  • Hi, I try to make a new esp-idf project for Stamp S3. But it comes the following error:

    0_1686212680370_Untitled.png



  • Hello @Ilkka

    creating such a project worked for me - this is the platformio.ini content that was created:

    [env:m5stack-stamps3]
    platform = espressif32
    board = m5stack-stamps3
    framework = espidf
    

    So the board m5stack-stamps3 is available.

    • Have you checked all components are up-to-date?
    • Have you checked there is enough free space on the disk?

    Thanks
    Felix



  • Hi Felix,

    I am not sure if everything is OK but I reinstalled esp-idf framework again.

    It works with some other Esp32-S3 boards.

    This is my platformio.ini:

    [env:m5stack-stamps3]
    platform = espressif32
    board = m5stack-stamps3
    framework = espidf

    And here some messages when trying to compile:

    • list itemExecuting task: C:\Users\XXX.platformio\penv\Scripts\platformio.exe run --environment m5stack-stamps3

    Processing m5stack-stamps3 (platform: espressif32; board: m5stack-stamps3; framework: espidf)
    Error: Unknown board ID 'm5stack-stamps3'

    • The terminal process "C:\Users\XXX.platformio\penv\Scripts\platformio.exe 'run', '--environment', 'm5stack-stamps3'" terminated with exit code: 1.

    • list itemTerminal will be reused by tasks, press any key to close it.



  • Hello @Ilkka

    hmm, not sure what's going wrong here. Maybe there is a difference between different computer platforms? You seem to be on Windows and I ran my test on Linux and I do not have access to a Windows machine. Sorry.

    Thanks
    Felix



  • Hi Felix,

    Thank your for your help. The most important is to hear that your system is working. I should have a Linux based development environment too.. I will make it.

    BR, Ilkka



  • Hi, I just tested quickly.. AtomS3 is OK; the project can be created and compiled.

    [env:m5stack-atoms3]
    platform = espressif32
    board = m5stack-atoms3
    framework = espidf



  • Hi, this issue was solved. Easy and logical way:

    VScode > PlantformIO home > plantforms > update

    0_1686380176220_Näyttökuva 2023-06-10 085534.png