MQTT Issues
-
I'm attempting to control a relay via MQTT. I've tried both io.adafruit.com and cloudmqtt.com. Using MQTTool on my phone, I'm able to connect/subscribe/publish to both services utilizing the same information as shown in the blocks.
Are there any glaring issues with my code blocks here? I've attempted this many different ways and I believe that this should work, but it doesn't appear that the M5Stack is connecting to either service. I've upgraded to firmware V1.12.6 and I'm working with UiFlow1.
Is there anyone out there who has been successful with this? It looks like there have been firmware issues in the past - is there a firmware version that is stable with MQTT?
-
Hi @cwdallas,
We tested for mqtt based on m5core and it works for my side
Are you testing in "RUN" or "DOWNLOAD" mode?
If using "DOWNLOAD" mode, you need to configure wifi first
-
That was the problem - thank you! I didn't receive any notifications that anyone had responded...
-
Hi @cwdallas, problem solved or not?
-
@pandian-nano Yes! thank you so much
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login