Power Supply of M5Stack Core2
-
Hi everyone,
I have a system with multiple components connected in parallel. The setup consists of 4 PA Hubs, each connected to 6 I2C weight measurement units. These PA Hubs are then connected to a 4-way relay unit. I’m considering using an M5Stack Core2 to power and control the entire system, but I’m unsure if it’s compatible or capable of handling this configuration. Could you provide insights on whether the M5Stack Core2 is suitable for this setup?
Thank you!
-
Hello @laursena
unfortunately I don't know the answer to your question about the power consumption and if M5Core2 can handle it.
However what I can tell you is that you do not necessarily need the PaHubs. The M5Stack I2C weight measurement units allow for the I2C address to be modified - so you could give each unit its own I2C address and simply connect them in parallel.
Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login