CoreS3 and COMX LoRaWAN868 v2.0
-
Hi,
I'm trying to configure the CoreS3 with the COMX LoRaWAN868 v2.0 module, but I haven't been able to get them working at all. I've tried multiple codes without any luck. Unfortunately, I can't find any guides specifically for the CoreS3 and this LoRa module.
Any help would be much appreciated!
-
@mohammedalmusimie
Have you tried the example code on the document? Have you configured pins define and dip switch correctly? -
@kuriko Thank you for your reply
yes I tried the examples but it looks like they are ment for m5core not coreS3. And I always change the dip switch according to the code. -
@mohammedalmusimie
have you adapted the codes to CoreS3?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login