M5StickC Plus2 crash when Button State call
-
Hello together,
I'am using the M5StickC Plus2 with the Rover.
I have an issue when trying to implement the Button state.
Whenewer I have other other Code in theloop()
besides theStickCP2.update()
and theIf(StickCP2.wasClicked())
the Controller is crashing. Here I wrote a simple Firmware:#include <Arduino.h> #include "M5StickCPlus2.h" #include "M5_RoverC.h" void setup() { Serial.begin(9600); Serial.println("Startup"); auto cfg = M5.config(); StickCP2.begin(cfg); StickCP2.Display.setFont(&fonts::Orbitron_Light_24); StickCP2.Display.setTextColor(GREEN,DARKGREY); StickCP2.Display.print("Startup"); delay(100); } void loop() { StickCP2.update(); Serial.println("Battery Test Start here!"); int vol = StickCP2.Power.getBatteryLevel(); StickCP2.Display.clear(); StickCP2.Display.setCursor(StickCP2.Display.width()/2, StickCP2.Display.height()/2); StickCP2.Display.printf("%d \%", vol); if (StickCP2.BtnA.wasClicked()) { StickCP2.Display.clear(DARKCYAN); } delay(50); }
I Only see the the BatteryLevel and then the screen gets dark and it restarts.
Serial Output is:Rebooting... �R��RgRStartup Battery Test Start here! Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled. Core 1 register dump: PC : 0x400d2312 PS : 0x00060a30 A0 : 0x800db9e4 A1 : 0x3ffb2270 A2 : 0x00000000 A3 : 0x3ffc2804 A4 : 0x00000064 A5 : 0x00000004 A6 : 0x3ffb8188 A7 : 0x80000001 A8 : 0x800d2310 A9 : 0x3ffb21d0 A10 : 0x00000004 A11 : 0x416778b6 A12 : 0x416778b6 A13 : 0x3ffb220c A14 : 0x3ffc2b70 A15 : 0x3ffb220c SAR : 0x0000001b EXCCAUSE: 0x0000001c EXCVADDR: 0x00000016 LBEG : 0x400867e0 LEND : 0x400867f6 LCOUNT : 0x00000000 Backtrace: 0x400d230f:0x3ffb2270 0x400db9e1:0x3ffb2290 ELF file SHA256: 706bf00c17c9ca5e ``` The Button Example for the StickC Plus 2 works fine. Also, when I remove everything else from the loop except the `Update` and the check for a Button action. I am Using Visual Studio Code and PlatformIO with the Arduiono Framework.