MicroPython Clock Task with RTC and NTP sync

M5MPy

Just new to MicroPhyton, I just collected some code pieces in the web to get a "Clock" background task coded with RTC and NTP Sync by just some code lines.
BTW. No flickering on the display etc.

Please feel free to comment; need to learn ;-)

# RTC Clock with NTP Sync for M5STACK
# References:
# https://forum.micropython.org/viewtopic.php?t=4329
# Lobo Version to init RTC and timezone
# https://forum.micropython.org/viewtopic.php?f=18&t=3553&p=21616&hilit=timezone#p21616
from m5stack import machine
from m5stack import lcd
from time import strftime
import utime
import _thread

# move to lowest line on M5STACK display
lcd.setCursor(0, 227)
lcd.setColor(lcd.WHITE)
lcd.print("RTC Clock 1")

# initiate rtc
rtc = machine.RTC()
print("Synchronize time from NTP server with TZ=Germany ...")
rtc.ntp_sync(server="hr.pool.ntp.org", tz="CET-1CEST,M3.5.0,M10.5.0/3")

def watch():
    while True:
        # start position for Date
        if not rtc.synced():                                                            # set color to sync status    
            lcd.setColor(lcd.RED)
        else: 
            lcd.setColor(lcd.GREEN)
#       lcd.setCursor(92, 227)                                                          # uncomment if you need date on display
#       lcd.print("Date {}".format(utime.strftime("%Y-%m-%d", utime.localtime())))      # uncomment if needed
        # start position for time only
        lcd.setCursor(213, 227)                                                         # uncomment if date active (see upper lines)
        lcd.print(" Time {}".format(utime.strftime('%H:%M:%S', utime.localtime())))
        utime.sleep(1)

_thread.start_new_thread ("clock",watch, ())

ItHasU

Thanks for your example. Where did you found the tz argument ? I cannot find any exhausitive documentation on the function.

simm

@ithasu,

check this link uclibc timezone list

M5MPy

yes, already answered, thanks to @simm

f3rn4nd0d

Just a little comment. I've used this code to have a tiny watch on a M5stick and it did not work till I added the connection to internet. So the code in my case looks like this:

import wifisetup
wifisetup.auto_connect()
from m5stack import *
from m5ui import *
...

and then the rest of the code is similar, changing timezone and whatnot.

Thanks for the code and best regards / Fernando

kalon33

@f3rn4nd0d I got "no module named 'wifisetup'" error, and without that, no 'strftime' in time... What am I missing in Mycropython for my M5Stack Gray?

Thanks for your help.