Lesson 14. UI Flow. Hello M5 UI Flow

lveronese

What about M5Burner for Mac OS ? Are you going to release it in the future?
Thanks
Luciano

gadjet

All flashes OK and detects the network OK but after the reset and the long press of "upload" it will not reconnect to the WiFi network ??? any one any ideas?
Thanks

m5-docs

@ajb2k3 You can burn the firmware via M5Burner
Here is the article guide you for burning
https://m5stack.readthedocs.io/en/latest/get-started/how_to_burn_firmware_en.html

m5-docs

@fab Thanks gay

m5-docs

@gadjet Is that problem exiting still? Try to reset your board again. Sometime, it is a problem about LAN network

m5-docs

To everyone:
Please download lastest version of M5Burner from official website
www.m5stack.com

cpyarger

@julian 在 Lesson 14. UI Flow. Hello M5 UI Flow 中说：

@dimi Nice start but how do we include other libraries so we can interface to other systems over http/mqtt/etc?

Also Curious about this

ajb2k3

Following the video on an OSX 10.12.6 using python 3.7 but getting the following when trying to connect.

Traceback (most recent call last):
File "./tools/esptool.py", line 2853, in <module>
_main()
File "./tools/esptool.py", line 2846, in _main
main()
File "./tools/esptool.py", line 2554, in main
esp.connect(args.before)
File "./tools/esptool.py", line 446, in connect
last_error = self._connect_attempt(mode=mode, esp32r0_delay=False)
File "./tools/esptool.py", line 405, in _connect_attempt
self._setRTS(True) # EN=LOW, chip in reset
File "./tools/esptool.py", line 377, in _setRTS
self._port.setDTR(self._port.dtr)
AttributeError: 'Serial' object has no attribute 'dtr'

However arduino is connecting with no trouble??

yurikleb

@cpyarger it basically runs microPython so you can import any module supported by micro python.

For example to connect to a wifi hotspot you can import the "network" module:
https://docs.micropython.org/en/latest/esp8266/quickref.html#networking

To upload custom files/modules you can use "adafruit ampy" or any of the other tools described in this tutorial: https://learn.adafruit.com/micropython-basics-load-files-and-run-code/overview
just make sure you upload them to the /flash/ folder.

Another useful thing is the REPL which allows you to see the MicroPython Log, very useful to debug your code and see what's happening in the background as not everything can be seen in the LCD:
https://docs.micropython.org/en/latest/wipy/tutorial/repl.html

The ESP32 also supports the WebREPL:
https://micropython.org/webrepl/

Alpine-Lake

@m5-docs This link points to a " page not available yet" message