Where can I find an example of retrieving data from BMM150 + SH200Q
-
I try to use any library but did not succeed
-
-
I can't find working examples neither. It would be nice if there was included examples in the M5Stack Arduino library. If someone can help it would be great. Thanks !
-
Hello @Yova,
there is a standard library for SH200Q available for the M5Stick. Since I have a M5Stack Fire core, I ported this library in order to work for this device. You can find it at the address: https://github.com/scavallero/SH200Q.
I will put there an example as soon as possible. -
Prova questa libreria
https://github.com/Seeed-Studio/Grove_3_Axis_Compass_V2.0_BMM150poi modifica BMM150_I2C_Address 0x13 con 0x10 nel file bmm150_defs.h
in questo modo dovresti poter accedere al BMM150.
Purtroppo M5STACK ha i magneti sul fondoTry this library
https://github.com/Seeed-Studio/Grove_3_Axis_Compass_V2.0_BMM150then modify BMM150_I2C_Address 0x13 with 0x10 in the file bmm150_defs.h
this way you should be able to access the BMM150.
Unfortunately M5STACK has magnets on the bottom -
In ogni caso potrai calibrare la bussola con lo sketc figure8_calibration.ino ruotando in varie direzioni M5STACK
In any case, you can calibrate the compass with the sketc figure8_calibration.ino by rotating in various directions M5STACK
-
-
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login