Input voltage and powering StickC
-
I have a project to control a linear actuator with a StickC and a SEEED 2 relay board. I want to add a set of reed switches to provide feedback to my code when the window the actuator is controlling is fully open or closed. Can I wire the reed switches directly to the StickC or do I need resistors/voltage dividers?
Additionally I would like to power the StickC from the 12VDC power supply. I have some BEC circuits but they only lower the voltage to 5vdc. Can these be used with the StickC? Do I connect to the BATT, 5VDC or 3.3? -
in the M5Stick head extension pin has 5V input , you can supply 5V power to there.
-
5v input to the 5v port or the BATT port?
-
@clocey 5V to 5<- (pin 8) and gnd to gnd (pin1)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login