I2C error when GOPlus servo + Grove Ultrasonic sensor
-
Hi
i try to use servo connected to GOPlus module and UtraSonic sensor SR 04.The SR04 with the classical 4 pins (trig and echo) works well alone (pin 21 and 22 )
When a servo is connected : it doesn't work anymore : i2Cbus error 110 (detail : File I2c-bus.py line 41 in write_U8 OSError 110.I thought first it was a problem with SR04 connexion on pin 21 and 22.
So i wanted to try the grove US sensor. But i didn't find a unit block.
(see https://forum.m5stack.com/topic/1907/uiflow-and-unit-grove-ultrasonic-distance-sensor)But i ve found this morning :
The I2C Error 110 occurs when Grove US sensor is connected on Port A and the servo stopped.
There is no similar error when Grove US sensor is connecter to port PB1 on GOPLUS moduleWhy ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login