M5burner fail to open on MacOS. Use esptool to flash the uiflow_firmware.
liushasha last edited by liushasha
M5burner has found compatible problems on Mac, as well as UIFlow desktop IDE. We appreciate the feedback from the users, and We apologize for the inconvenient. The R&D department team of M5Stack is now working on it. Before we have this problem fixed, if you have trouble downloading the firmware, you can use 'esptool'. Here are the steps:
1, Make sure you have 'esptool' installed on your Mac. Tutorial website:
2, To check if have 'esptool' installed: type command esptool.py , in 'terminal'. If a display showed this, means it is installed.
3, Download uiflow-firmware: https://github.com/EeeeBin/UIFlow-Firmware , unzip.
4, At 'terminal' find directory locate directory to '.../UIFlow-Firmware-master/firmware_en'
5, Connect m5stack device via USB cable. Go inside the folder type in command ./flash.sh to start flahing
ajb2k3 last edited by
Can you also post this in the UIFLOW forum please.
liushasha last edited by