UiFlow upgrade
-
Actually it's not possible to download UiFlow v 1.0.2 and firmware v 1.3.5-beta in Windows10.
Can somebody help with it? -
@kees1949 Others have managed it, what is the problem?
-
After using the button "Update Now" the system reports "Downloading" and nothing happens any more. Later the system reports "Download failed".
The download of the firmware doesn't report anything at all. -
Make sure drivers is proper installed and mstack unit is recognized under devices on some COM port.
-
I'm speaking about the dowload to the PC, not to the M5Stack.
-
@kees1949 said in UiFlow upgrade:
I'm speaking about the dowload to the PC, not to the M5Stack.
Ahh
Right after check all is fine. From download we got 1.0.1 then check fot update works fine for me. 1.0.2 was detected and auto downloaded without any problem. -
With the standalone version of M5Burner it is possible to download and upgrade the firmware on the M5Stack. However after that the versions on the PC and the M5stack are not synchronous.
-
A complete new download and installation of the UiFlow Desktop has solved the issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login