M5Atom Matrix Firmware flash fail
-
Hello,
I am trying to flash the M5Atom and keep getting the following error. Is there a way to reset or get around this issue. It has occurred on both a Mac and PC.
Any advice will be very much appreciated.
Command:
--chip esp32 --port COM4 --baud 921600 --before default_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x10000 application_0x10000.bin 0x1000 bootloader_0x1000.bin 0x200000 fatfsImg_0x200000.img 0x8000 partitions_0x8000.bin 0xf000 phy_init_data_0xf000.bin 0x3ff000 wifi_0x3ff000.binesptool.py v2.5.0
Serial port COM4
Connecting....
Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse
MAC: d8:a0:1d:5e:77:30
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...A fatal error occurred: Timed out waiting for packet header
-
I had to use a windows machine with M5Burner because as much as I tried the Mac version would no work as expected. However I got it flashed back to UIFlow 1.4.5 and got it working now
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login