M5stack Fire - no check code for binding device
-
Hi all!
I hope this question is not too simple. I finally got my new m5stack fire, unboxed it, connected first to the m5-wifi then entered my SSID and let the device reboot. The next step would be to bind the m5stack to my io.m5stack with the check code. BUT: where is this code? The m5stack just shows either a rock paper scissor button test or a screen with some lessons and the information, that no device has been connected yet. No code anywhere to be seen. I am sure, I am just missing something very simple but anyhow - its a blocking point that prevents me from the acutal coding. ;-)
Thanks for your support.
Caly. -
@calypticus Hi, I just have bumped into the same problem as you.
-
@soogie me three :(
-
This post is deleted! -
This post is deleted! -
@soogie Hello
Try to burn a M5GO firmware please.
This is the article about how to burn a firmware
https://m5stack.readthedocs.io/en/latest/get-started/how_to_burn_firmware_en.html -
@mynameisdavehi Hello
Try to burn a M5GO firmware please.
This is the article about how to burn a firmware
https://m5stack.readthedocs.io/en/latest/get-started/how_to_burn_firmware_en.html -
@watson Thank you, but I use mac.
I will look for some way to burn ith my mac. -
-
@lukasmaximus Thank you for your comment. I'll see Youtube later.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login