Updated version, working Core2 web radio player, M5Stack



  • Re: [CORE2 as Web radio](without extra hardware ?)

    I made a few GUI changes, and checked into the library used for the decoding.

    I think it's worth noting that the actual library for the functions came from:
    Earle Philhower III
    Who credits his library in part to : StellaPlayer and libMAD
    https://github.com/earlephilhower/ESP8266Audio

    Looking through the library so far I can not tell if there is extra information extracted from the stream that we can make use of.

    Here is the latest code:

    /*
       March 28, 2021
       Made changes to the Example Core2 Web Radio Player from:
       https://www.hackster.io/tommyho/arduino-web-radio-player-c4cb23
    
        Wish List: 
        slightly organized the code into better sections (Done)
        Nicer Fonts (Done)
        Use 2nd CPU Core to handle GUI and button's so we keep it responsive
        Add bluetooth output to Bluetooth speakers / headest
        Get more information from the stream,  Album art, etc.
          --  Checked into what comes into the stream So far I don't see extra data
        Get track length and have a progress bar for the track
          -- Again I don't see if this information comes in from the library
        Have an interface to select WiFi network and enter password
        -- Store password in EEPROM
        Better mehod of selecting stations
        ? Maybe web interface for setting up station lists?
    
        I see that the actual library for the functions came from:
        Earle Philhower III
        Who credits his library to :  StellaPlayer and libMAD
        https://github.com/earlephilhower/ESP8266Audio
    
    
    */
    
    //
    //  m5StreamTest Version 2020.12b (Source/Buffer Tester)
    //  Board: M5StackCore2 (esp32)
    //  Author: tommyho510@gmail.com
    //  Required: Arduino library ESP8266Audio 1.60
    //
    
    #include <M5Core2.h>
    #include <driver/i2s.h>
    #include <WiFi.h>
    #include <AudioFileSourceICYStream.h>
    #include <AudioFileSource.h>
    #include <AudioFileSourceBuffer.h>
    #include <AudioFileSourceSPIRAMBuffer.h>
    #include <AudioGeneratorMP3.h>
    #include <AudioOutputI2S.h>
    #include "Free_Fonts.h"
    //#include <spiram-fast.h>
    
    const int bufferSize = 128 * 1024; // buffer size in byte
    
    
    // Enter your WiFi, Station, button settings here:
    
    const char *SSID = "ENTER_SSID_HERE";
    const char *PASSWORD = "ENTER_WIFI_PASSWORD_HERE";
    
    
    // Added Charlie FM in Portland Oregon
    //http://24083.live.streamtheworld.com:80/KYCHFM_SC
    //
    //Removed these from the list:
    //  {"Mega Shuffle", "http://jenny.torontocast.com:8134/stream"},
    //  {"Way Up Radio", "http://188.165.212.154:8478/stream"},
    //  {"Asia Dream", "https://igor.torontocast.com:1025/;.-mp3"},
    //  {"KPop Way Radio", "http://streamer.radio.co/s06b196587/listen"},
    //  {"SomaFM", "http://ice2.somafm.com/christmas-128-mp3"}
    
    const int stations = 7;// Change Number here if you add feeds!
    char * stationList[stations][2] = {
      {"Charlie FM", "http://24083.live.streamtheworld.com:80/KYCHFM_SC"},
      {"MAXXED Out", "http://149.56.195.94:8015/steam"},
      {"Orig. Top 40", "http://ais-edge09-live365-dal02.cdnstream.com/a25710"},
      {"Smooth Jazz", "http://sj32.hnux.com/stream?type=http&nocache=3104"},
      {"Smooth Lounge", "http://sl32.hnux.com/stream?type=http&nocache=1257"},
      {"Classic FM", "http://media-ice.musicradio.com:80/ClassicFMMP3"},
      {"Lite Favorites", "http://naxos.cdnstream.com:80/1255_128"}
    };
    
    float audioGain = 0.0;
    float gainfactor = 0.08;
    int currentStationNumber = 0;
    unsigned long disUpdate = millis();
    
    AudioGeneratorMP3 *mp3;
    AudioFileSourceICYStream *filemp3;
    AudioFileSourceBuffer *buffmp3;
    AudioOutputI2S *out, *outmp3;
    
    
    // Draw a + mark centred on x,y
    void drawDatumMarker(int x, int y)
    {
      M5.Lcd.drawLine(x - 5, y, x + 5, y, TFT_GREEN);
      M5.Lcd.drawLine(x, y - 5, x, y + 5, TFT_GREEN);
    }
    
    /// WIFI Routines *********************
    
    void initwifi() {
    
      M5.Lcd.setTextColor(TFT_BLUE, TFT_BLACK);
      
      M5.Lcd.setTextSize(2);
      M5.Lcd.setTextDatum(BC_DATUM);
      M5.Lcd.setFreeFont(FSB12);   
      M5.Lcd.drawString("Connecting..", M5.Lcd.width()/2, 200, GFXFF);
    
      WiFi.disconnect();
      WiFi.softAPdisconnect(true);
      WiFi.mode(WIFI_STA);
      WiFi.begin(SSID, PASSWORD);
      // Try forever
      int i = 0;
      while (WiFi.status() != WL_CONNECTED) {
        Serial.print("STATUS(Connecting to WiFi) ");
        delay(1500);
        i = i + 1;
        if (i > 15) {
          ESP.restart();
        }
      }
      Serial.println("\nWiFi Connected!\n");
    }
    
    
    // Display network information on the LCD
    void displayWiFiInformation() {
      M5.Lcd.setTextColor(TFT_WHITE, TFT_BLACK);
      M5.Lcd.setTextSize(1);
      M5.Lcd.setFreeFont(FSS9);    
      M5.Lcd.setTextDatum(BL_DATUM); 
      M5.Lcd.drawString("Network: ", 10, 165, GFXFF);
      M5.Lcd.drawString("IP: " , 10, 190, GFXFF);
      M5.Lcd.drawString(SSID, 90, 165, GFXFF);
      M5.Lcd.drawString(WiFi.localIP().toString(),40,190,GFXFF);
    }
    
    
    // Update WiFi Signal Strength
    void updateWiFiSignal() {
      // Display the WiFi Signal Strength
      M5.Lcd.setTextColor(TFT_WHITE, TFT_BLACK);
      M5.Lcd.setTextSize(1);
      M5.Lcd.setFreeFont(FSS9);    
      M5.Lcd.setTextDatum(BL_DATUM); 
      M5.Lcd.drawString("WiFi Signal: ", 10, 215, GFXFF);
      M5.Lcd.fillRect(112,195,30,20,BLACK);
      uint16_t clr = GREEN;
      clr = (WiFi.RSSI() < -70) ? TFT_RED : TFT_GREEN;
      M5.Lcd.setTextColor(clr, TFT_BLACK);  
      M5.Lcd.drawString(String(WiFi.RSSI()),115, 215, GFXFF);
    }
    
    
    /// Battery ***************************
    
    // Calculate Battery Useable range  (3.2 to 4.1 Volts)
    void displayBattery() {
      M5.Lcd.setTextSize(1);
      M5.Lcd.setFreeFont(FSS9);  
      int maxVolts = 410;  // Battery Max volts * 100
      int minVolts = 320;  // Battery Min Volts * 100
      M5.Lcd.setTextColor(TFT_WHITE, TFT_BLACK);
      
      M5.Lcd.setTextSize(1);
      char battInfo[5];
      dtostrf(M5.Axp.GetBatVoltage(),1,2,battInfo); 
      String btInfo = "Batt: " + String(battInfo);
      M5.Lcd.setTextDatum(BL_DATUM);  
      M5.Lcd.drawString(btInfo, 230, 215, GFXFF);
    //  drawDatumMarker(230,215);
        
      int batt = map(M5.Axp.GetBatVoltage() * 100, minVolts, maxVolts, 0 , 10000) / 100.0;
    
      // Draw Battery bar(s) on the right side of the screen
      uint16_t clr = GREEN;
      for (int x = 9; x >= 0; x--) {
        if (x < 3) clr = RED;
        else if (x < 6) clr = YELLOW;   
        M5.Lcd.fillRoundRect(314, (216 - (x * 24)), 6, 21, 2, (batt > (x * 10)) ? clr : BLACK);
        M5.Lcd.drawRoundRect(314, (216 - (x * 24)), 6, 21, 2, TFT_LIGHTGREY);
      }
    }
    
    
    // MISC  ****************************
    
    
    // Remove the Track information (While changing stations)
    void clearTrack() {
      M5.Lcd.fillRect(10, 55, 300, 70, TFT_DARKGREY); // Clear the area of old data
      M5.Lcd.drawRect(10, 55, 300, 70, BLUE); // Draw a box around the Track Information
    }
    
    
    // Identify buttons at the bottom of screen
    void drawButtons() {
      M5.Lcd.fillRect(10,220,300,25,YELLOW);
      M5.Lcd.setTextColor(TFT_BLACK);  
      M5.Lcd.setTextSize(1);
      M5.Lcd.setTextDatum(TC_DATUM);
      M5.Lcd.setFreeFont(FSB12);   
      M5.Lcd.drawString("Volume", 55,220, GFXFF);
      M5.Lcd.drawString("Station", M5.Lcd.width()/2,220, GFXFF);
      M5.Lcd.drawString("Mute", 270 ,220, GFXFF);  
    }
    
    
    // Get the Split String Value Used for Band or Track
    String getValue(String data, char separator, int index) {
      int found = 0;
      int strIndex[] = {0, -1};
      int maxIndex = data.length() - 1;
    
      for (int i = 0; i <= maxIndex && found <= index; i++) {
        if (data.charAt(i) == separator || i == maxIndex) {
          found++;
          strIndex[0] = strIndex[1] + 1;
          strIndex[1] = (i == maxIndex) ? i + 1 : i;
        }
      }
      return found > index ? data.substring(strIndex[0], strIndex[1]) : "";
    }
    
    
    // MP3, Audio etc.  ****************************
    
    // Called when a metadata event occurs (i.e. an ID3 tag, an ICY block, etc.
    void MDCallback(void *cbData, const char *type, bool isUnicode, const char *string) {
      const char *ptr = reinterpret_cast<const char *>(cbData);
      (void) isUnicode; // Punt this ball for now
      // Note that the type and string may be in PROGMEM, so copy them to RAM for printf
      char s1[32], s2[64];
      strncpy_P(s1, type, sizeof(s1));
      s1[sizeof(s1) - 1] = 0;
      strncpy_P(s2, string, sizeof(s2));
      s2[sizeof(s2) - 1] = 0;
    
      String band  = getValue(s2, '-', 0);
      band.trim();
      String track = getValue(s2, '-', 1);
      track.trim();
    
      if(band.length() > 30) band = band.substring(0, 30);
      if(track.length() > 30) track = track.substring(0, 30);
    
    //  Serial.printf("Band: %s   Track:  %s  \n", band.c_str(), track.c_str());
      Serial.printf("METADATA(%s) '%s' = '%s'\n", ptr, s1, s2);
      M5.Lcd.setTextSize(1);
    
      M5.Lcd.setTextColor(TFT_BLACK, TFT_DARKGREY );
      
      clearTrack();
      M5.Lcd.setTextDatum(MC_DATUM);
      M5.Lcd.setFreeFont(FSS9); 
      if(band.length() < 20) M5.Lcd.setFreeFont(FSS12);                              // Select the font
      M5.Lcd.drawString(band, M5.Lcd.width()/2, 72, GFXFF);
      M5.Lcd.setFreeFont(FSS9);
      if(track.length() < 20) M5.Lcd.setFreeFont(FSS12);
    //  M5.Lcd.setTextDatum(MC_DATUM);
      M5.Lcd.drawString(track, M5.Lcd.width()/2, 107, GFXFF);
      Serial.flush();
      // Make sure the new song information does not overwrite the battery
      displayBattery();
    }
    
    
    // Called when there's a warning or error (like a buffer underflow or decode hiccup)
    void StatusCallback(void *cbData, int code, const char *string) {
      const char *ptr = reinterpret_cast<const char *>(cbData);
      // Note that the string may be in PROGMEM, so copy it to RAM for printf
      char s1[64];
      strncpy_P(s1, string, sizeof(s1));
      s1[sizeof(s1) - 1] = 0;
      Serial.printf("STATUS(%s) '%d' = '%s'\n", ptr, code, s1);
      Serial.flush();
    }
    
    
    void stopPlaying() {
      Serial.printf("Stopping MP3...\n");
      if (mp3) {
        mp3->stop();
        delete mp3;
        mp3 = NULL;
      }
      Serial.printf("MP3 Stopped, Stopping Buffer...\n");
      if (buffmp3) {
        buffmp3->close();
        delete buffmp3;
        buffmp3 = NULL;
      }
      Serial.printf("Buffer stopped... Stopping File ...\n");
      if (filemp3) {
        filemp3->close();
        delete filemp3;
        filemp3 = NULL;
      }
      if (outmp3) {
        //    filemp3->close();
        delete outmp3;
        outmp3 = NULL;
      }
    
      Serial.printf("STATUS(Stopped)\n");
      Serial.flush();
    }
    
    
    // Update the Station Label
    void updateStation(String message) {
      M5.Lcd.fillRect(10, 10, 300, 35, BLACK); // Clear out other information on the line
      M5.Lcd.setTextColor(TFT_GREEN, TFT_BLACK);
      M5.Lcd.setTextSize(1);
      M5.Lcd.setTextDatum(TC_DATUM);
    
      M5.Lcd.setFreeFont(FSB18);
      M5.Lcd.drawString(message, M5.Lcd.width()/2, 10, GFXFF);
    }
    
    
    // Change to the next station
    void changeStation() {
      updateStation("Changing..Wait..");
      currentStationNumber++;
      if (currentStationNumber >= stations) currentStationNumber = 0;
      Serial.printf("\n******** Changing to channel number: %i\n", currentStationNumber);
    }
    
    
    // Change the volume level
    // Update the volume graphic
    void changeVolume() {
      audioGain += 1.0;
      if (audioGain > 10.0) {
        audioGain = 1.0;
      }
      if (audioGain < 0.0) {
        audioGain = 0.0;
      }
      
      int xtPos = 260; // X Position for the Volume indication
      outmp3->SetGain(audioGain * gainfactor); // Change Volume to new level
    
    //---------New Volume Bar on left side of LCD  *******************
      // Draw Volume bar(s) on the left side of the screen
      uint16_t clr = RED;
      for (int x = 9; x >= 0; x--) {
        if (x < 5) clr = GREEN;
        else if (x < 8) clr = TFT_ORANGE;   
        M5.Lcd.fillRoundRect(0, (216 - (x * 24)), 6, 21, 2, (audioGain > x ) ? clr : BLACK);
        M5.Lcd.drawRoundRect(0, (216 - (x * 24)), 6, 21, 2, TFT_LIGHTGREY);
      }
    
      // Alternate Draw the Volume Indicator (Triangle)
    //  M5.Lcd.fillTriangle(xtPos, 20, xtPos + 50, 20, xtPos + 50, 0, BLACK); // Clear out old Meter
    //  if (audioGain > 9) { // If we are full, draw red, blue and green
    //    M5.Lcd.fillTriangle(xtPos, 20, xtPos + (5 * audioGain), 20, xtPos + (5 * audioGain), 20 - (2 * audioGain), RED);
    //    M5.Lcd.fillTriangle(xtPos, 20, xtPos + (5 * 9), 20, xtPos + (5 * 9), 20 - (2 * 9), BLUE);
    //    M5.Lcd.fillTriangle(xtPos, 20, xtPos + (5 * 6), 20, xtPos + (5 * 6), 20 - (2 * 6), GREEN);
    //  }
    //  else if (audioGain >= 6) { // if above 5, draw blue and green
    //    M5.Lcd.fillTriangle(xtPos, 20, xtPos + (5 * audioGain), 20, xtPos + (5 * audioGain), 20 - (2 * audioGain), BLUE);
    //    M5.Lcd.fillTriangle(xtPos, 20, xtPos + (5 * 6), 20, xtPos + (5 * 6), 20 - (2 * 6), GREEN);
    //  }
    //  else if (audioGain >= 1)
    //    M5.Lcd.fillTriangle(xtPos, 20, xtPos + (5 * audioGain), 20, xtPos + (5 * audioGain), 20 - (2 * audioGain), GREEN);
    }
    
    
    /*
       Setup output to I2S Device
       Set Pins and Gain
       Set FileSource as web radio station
       Join FileSource to get MetaData
       Create Buffer for data
       Register Callback for...?
       Begin the MP3 playback
    */
    void playMP3() {
      outmp3 = new AudioOutputI2S(0, 0); // Output to builtInDAC
      outmp3->SetPinout(12, 0, 2);
      outmp3->SetOutputModeMono(true);
      outmp3->SetGain(audioGain * gainfactor);
      filemp3 = new AudioFileSourceICYStream(stationList[currentStationNumber][1]);
      filemp3->RegisterMetadataCB(MDCallback, (void*)"ICY"); // ID3TAG  // ICY
      // StreamTitle
      buffmp3 = new AudioFileSourceBuffer(filemp3, bufferSize);
      buffmp3->RegisterStatusCB(StatusCallback, (void*)"buffer");
      mp3 = new AudioGeneratorMP3();
      mp3->RegisterStatusCB(StatusCallback, (void*)"mp3");
      mp3->begin(buffmp3, outmp3);
      Serial.printf("STATUS(URL) %s %s\n", stationList[currentStationNumber][0], stationList[currentStationNumber][1]);
      Serial.flush();
      updateStation(String(stationList[currentStationNumber][0]));
    }
    
    
    void loopMP3() {
      if (mp3 != NULL) {  // To avoid crash while changing stationsI
        if (mp3->isRunning()) {
          if (!mp3->loop()) mp3->stop();
        } else {
          Serial.printf("Status(Stream) Stopped \n");
          clearTrack();
          changeStation();
          //      stopPlaying();
          delay(1000);
          playMP3();
        }
      }
    }
    
    
    // General Arduino Routines
    
    void setup() {
      Serial.begin(115200);
    
      M5.begin();
      M5.Axp.SetSpkEnable(true);
      //  M5.Lcd.setRotation(3);
      M5.Lcd.fillScreen(BLACK);
      M5.Lcd.setTextWrap(false);
    
      M5.Lcd.setTextColor(TFT_GREEN, TFT_BLACK);
      M5.Lcd.setTextSize(1);
      M5.Lcd.setTextDatum(TC_DATUM);
      M5.Lcd.setFreeFont(FSB18);   
      M5.Lcd.drawString("Core2 Web Radio", M5.Lcd.width()/2, 20, GFXFF);
    
      initwifi();
      delay(500);
      M5.Lcd.clear();
      drawButtons();
      playMP3();
      changeVolume();  // To update Volume setting and graphic
      displayWiFiInformation();
    }
    
    
    void loop() {
      loopMP3();
      M5.update();
    
      if (m5.BtnA.wasPressed()) { //Change Volume(Button A)
        changeVolume();
      }
    
      if (m5.BtnB.wasPressed()) { //Change Station(Button B)
        clearTrack();
        changeStation();
        stopPlaying();
        playMP3();
      }
    
      if (m5.BtnC.wasPressed()) { //Mute  (Button C)
        audioGain = -1.0;
        changeVolume();
      }
    
      // Update the battery voltage, and WiFi Signal every second
      if ((disUpdate + 1000) < millis()) {
        disUpdate = millis();
        displayBattery();
        updateWiFiSignal();
      }
    }
    
    
    
    

    But this is a slightly nicer interface.



  • @homeuser33
    Thanks for the updates. The new version gave me compiling error because the font not found. Then I added #include "Free_Fonts.h", now it's working.
    I really like this web radio player, especially the stations you chose. I play this all day by my laptop.
    Looking forward to seeing the new updates.



  • @raychmond
    Thank you, I've added the include now in the program, not sure why it worked for me without it.

    I'll make the changes in the program listing above. Thank you.

    Yes, I like Charlie FM : https://worldradiomap.com/us-or/play/kych_live
    If you click the 'Listen with your player' button it downloads a .PLS file that has links to their station. I have not found many good stations with this option.

    https://www.radio.com/charliefm



  • @homeuser33

    Just a suggestion... Instead of posting your code and updates here, can you please upload them to Github so change management and commits are easier to track? I apologize if you already have it on Github... maybe I missed it.



  • @world101
    No, It's a good point. Generally I have not shared much code since I'm still fairly new to the M5Stack hardware. I was thinking this would be a one off since I found the answer for the media player. But its a good point. I'll check into that.
    Thank you.



  • @world101

    Okay, that seemed easier than I thought.
    Link: https://github.com/bwbguard/M5Stack-Core2-MediaPlayer



  • @homeuser33

    👍🏻👍🏻👍🏻 Thanks!



  • @homeuser33

    Two things based on my testing.

    1. The program works with latest ESP8266Audio v1.8.1 library as well.
    2. I had to disable PSRAM in the Arduino board settings to get the program to work. When enabled, Arduino would flash the program and reset, but nothing would happen after that. Here is my board setup for Arduino on my Mac.

    0_1616950951750_Screen Shot 2021-03-28 at 1.01.24 PM.png

    Thanks!



  • @world101
    I'm not sure what to say about that, PSRAM is enabled on my Linux setup and so far seems to be working.



  • I think it's the matter of the board selection. When I first tried homeuser33's code I used the M5Stack OEM board: M5Stack Arduino>M5Stack-Core2(The PSRAM is enabled). It kept rebooting itself. I then switched to ESP32 Arduino>M5Stack-Core2(The PSRAM is enabled as well), it then worked.
    Today, I tried different combinations. It ended up with that the only scenario that it's not working if you use M5Stack Arduino>M5Stack-Core2 with PSRAM enabled. M5Stack Arduino>M5Stack-Core2 with PSRAM disabled works perfectly like world101 said. But if you use ESP32 Arduino>M5Stack-Core2, both enabled and disabled work. So I guess this is the matter of selecting different boards.

    Thanks!



  • @raychmond
    Thanks for the update, It's been awhile sine I added the Core2 board manager so I don't remember which source I used. If I find it I'll update here. Thank you.



  • @homeuser33 I tried downloading your code and running. It compiles and load on Core2 but then the touch does not work and cannot hear any Audio, it feels like the program has halted. It does try to play something as i can hear a sound but after that it stops.



  • @homeuser33 said in Updated version, working Core2 web radio player, M5Stack:

    Hello, the code runs but it is stuck on the "Connecting" screen from the initwifi() function. I put the correct SSID and password it is still not working. Please try to help me out.



  • @bhupiister
    I had a similar problem. You could try to remove the line 'Serial.begin(115200);' in setup(). It has already been called by M5Core2.cpp from the library. Calling it a second time makes a couple of my sketches hang.



  • @clairlune
    See my reply @bhupiister (after it has been approved). Hope it solves your problem.



  • Attempting to compile the web radio player on a Core2. I am getting the following errors. Any help would be appreciated.
    Joe

    Arduino: 1.8.19 (Windows 10), Board: "M5Stack-Core2, Enabled, Default (2 x 6.5 MB app, 3.6 MB SPIFFS), 240MHz (WiFi/BT), 1500000, None"

    C:\Users\jld\Documents\Arduino\MediaPlayer\MediaPlayer.ino:61:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

    };

    ^

    In file included from C:\Users\jld\Documents\Arduino\libraries\ESP8266Audio\src\AudioGeneratorMIDI.cpp:65:

    C:\Users\jld\Documents\Arduino\libraries\ESP8266Audio\src\libtinysoundfont/tsf.h: In function 'void tsf_channel_midi_control(tsf*, int, int, int)':

    C:\Users\jld\Documents\Arduino\libraries\ESP8266Audio\src\libtinysoundfont/tsf.h:2100:1: error: insn does not satisfy its constraints:

    }

    ^

    (insn 858 343 344 51 (set (reg:SF 19 f0 [407])

    (mem/u/c:SF (symbol_ref/u:SI ("*.LC248") [flags 0x2]) [0 S4 A32])) "C:\Users\jld\Documents\Arduino\libraries\ESP8266Audio\src\libtinysoundfont/tsf.h":2053 47 {movsf_internal}

    (nil))

    during RTL pass: postreload

    C:\Users\jld\Documents\Arduino\libraries\ESP8266Audio\src\libtinysoundfont/tsf.h:2100:1: internal compiler error: in extract_constrain_insn, at recog.c:2210

    Please submit a full bug report,

    with preprocessed source if appropriate.

    See https://gcc.gnu.org/bugs/ for instructions.

    exit status 1

    Error compiling for board M5Stack-Core2.



  • @jdonth Had the exact same problem.........after 3 hours of googling, finally found the issue. Take a look at this diff file:

    https://git.koehlerweb.org/frodovdr/Sonoff-Tasmota/commit/8a764f86ee9f1129507f4654d07c7a7cb24cc87e

    It's totally unrelated to this project. Just a bug that freaks out the IDE. Anyhow......a couple of lines need to be changed in :

    \libraries\ESP8266Audio\src\libtinysoundfont\tsf.h

    Hopefully it makes sense......Hope it helps....