Trying to install Rhasspy on a M5 Atom Echo using platformio

  • Hi, I am trying to install a rhasspy/satellite software on a M5 Aton Echo, using platformio in VisualStudioCode.
    However i get an error while trying to upload.
    Has anyone succeeded in uploading something on an Atom Echo ? Here are my results of my tries :

    Auto-detected: COM3
    Uploading .pio\build\m5stack-core-esp32\firmware.bin v3.1
    Serial port COM3
    Chip is ESP32-PICO-D4 (revision 1)
    Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse, Coding Scheme None
    Crystal is 40MHz
    MAC: 94:b9:7e:8c:c1:c8
    Uploading stub...
    Running stub...
    Stub running...
    Changing baud rate to 460800
    Configuring flash size...

    A fatal error occurred: Timed out waiting for packet header
    *** [upload] Error 2

  • Hello @Jevylux

    try a slower upload speed, like 115200. E.g. add this line in platform.ini:

    upload_speed = 115200