🤖Have you ever tried Chat.M5Stack.com before asking??😎
    M5Stack Community
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Edukit ATECC608B & AWS IOT & UiFlow

    Core2 for AWS
    4
    35
    58.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • felmueF
      felmue
      last edited by

      Hello @ajb2k3

      are you doing multiple i2c.scan() calls on purpose? When I try that I only get an empty list. However doing only one scan works for me.

      I went through older M5Core2 UIFlow firmware versions and all of them crash on me when using the ID unit with custom values for I2C (e.g. 21, 22) in order to access the ATECC608 in the AWS bottom. And UIFlow firmware 1.7.5 doesn't support the ID unit.

      BTW: The ATECC608B has a sleep mode and when it is in that mode it will not show up during an I2C scan.

      Thanks
      Felix

      GPIO translation table M5Stack / M5Core2
      Information about various M5Stack products.
      Code examples

      ajb2k3A 1 Reply Last reply Reply Quote 0
      • ajb2k3A
        ajb2k3 @felmue
        last edited by

        @felmue I'm doing multi scans because I'm not sure how do make one and pass the results to both the Label and print functions.

        Yeh found out about the sleep mode, you have to hard reset the base plate to wake it up before running an i2C scan.
        I'm running 1.10.2 and found the issue is in the i2C setup function.

        addresses = i2c.scan()
        Is just a left over function of what I was testing earlier.

        UIFlow, so easy an adult can learn it!
        If I don't know it, be patient!
        I've ether not learned it or am too drunk to remember it!
        Author of the WIP UIFlow Handbook!
        M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

        1 Reply Last reply Reply Quote 0
        • ajb2k3A
          ajb2k3
          last edited by

          And more progress!
          I have stable access to the Core2 AWS' ATECC608b

          >>> help(_ID.ID)
          object <class 'ID'> is of type type
            receiveResponseData -- <function receiveResponseData at 0x3f95ce00>
            read_output -- <function read_output at 0x3f95d1d0>
            publicKey64Bytes -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            verifySignature -- <function verifySignature at 0x3f95d260>
            wakeup -- <function wakeup at 0x3f95cc90>
            dataOTPLockStatus -- False
            createNewKeyPair -- <function createNewKeyPair at 0x3f95ce60>
            signTempKey -- <function signTempKey at 0x3f95d240>
            generatePublicKey -- <function generatePublicKey at 0x3f95d1a0>
            getRandomInt -- <function getRandomInt at 0x3f95cdc0>
            sha256 -- <function sha256 at 0x3f95d270>
            updateRandom32Bytes -- <function updateRandom32Bytes at 0x3f95cd10>
            random32Bytes -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            KeyConfig -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            configZone -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            input_buffer -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            writeConfigZone -- <function writeConfigZone at 0x3f95d280>
            lockDataSlot0 -- <function lockDataSlot0 at 0x3f95ccf0>
            signature -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            readConfigZone -- <function readConfigZone at 0x3f95ccd0>
            get_crc -- bytearray(b'\x00\x00')
            countGlobal -- 0
            check_crc -- <function check_crc at 0x3f95ce20>
            read -- <function read at 0x3f95d1c0>
            write -- <function write at 0x3f95d1e0>
            __init__ -- <function __init__ at 0x3f95cd90>
            slot0LockStatus -- False
            createSignature -- <function createSignature at 0x3f95d200>
            revisionNumber -- bytearray(b'\x00\x00\x00\x00\x00')
            get_info -- <function get_info at 0x3f95ccb0>
            getRandomLong -- <function getRandomLong at 0x3f95cdd0>
            random_min_max -- <function random_min_max at 0x3f95cdf0>
            __module__ -- units._ID
            configLockStatus -- False
            hash256 -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            lockDataAndOTP -- <function lockDataAndOTP at 0x3f95cce0>
            random_max -- <function random_max at 0x3f95cde0>
            idle_mode -- <function idle_mode at 0x3f95cca0>
            calculate_crc -- <function calculate_crc at 0x3f95ce30>
            cleanInputBuffer -- <function cleanInputBuffer at 0x3f95ce40>
            lock_config -- <function lock_config at 0x3f95ccc0>
            __qualname__ -- ID
            serialNumber -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
            lock -- <function lock at 0x3f95cd00>
            loadTempKey -- <function loadTempKey at 0x3f95d220>
            getRandomByte -- <function getRandomByte at 0x3f95cdb0>
            sendCommand -- <function sendCommand at 0x3f95d2c0>
            check_count -- <function check_count at 0x3f95ce10>
            SlotConfig -- bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
          >>> help(_ID.ID.wakeup)
          object <function wakeup at 0x3f95cc90> is of type function
          >>> help(_ID.ID.get_info)
          object <function get_info at 0x3f95ccb0> is of type function
          >>> help('_ID.ID.get_info')
          object _ID.ID.get_info is of type str
            encode -- <function>
            find -- <function>
            rfind -- <function>
            index -- <function>
            rindex -- <function>
            join -- <function>
            split -- <function>
            splitlines -- <function>
            rsplit -- <function>
            startswith -- <function>
            endswith -- <function>
            strip -- <function>
            lstrip -- <function>
            rstrip -- <function>
            format -- <function>
            replace -- <function>
            count -- <function>
            partition -- <function>
            rpartition -- <function>
            center -- <function>
            lower -- <function>
            upper -- <function>
            isspace -- <function>
            isalpha -- <function>
            isdigit -- <function>
            isupper -- <function>
            islower -- <function>
          >>> import i2c_bus
          >>> i2c = machine.I2C(scl=machine.Pin(22), sda=machine.Pin(21), freq=133000)
          Traceback (most recent call last):
            File "<stdin>", line 1, in <module>
          NameError: name 'machine' isn't defined
          >>> import i2c_bus
          >>> Import machine
          Traceback (most recent call last):
            File "<stdin>", line 1
          SyntaxError: invalid syntax
          >>> import machine
          >>> i2c = machine.I2C(scl=machine.Pin(22), sda=machine.Pin(21), freq=133000)
          >>> print(i2c.scan())
          [52, 53, 56, 81, 104]
          >>> import units
          >>> from units import _ID
          >>> i2c.wakeup
          Traceback (most recent call last):
            File "<stdin>", line 1, in <module>
          AttributeError: 'I2C' object has no attribute 'wakeup'
          >>> ID_0 = unit.get(unit.ID, (21,22))
          >>> ID_0.wakeup
          <bound_method>
          >>> ID_0.ID.wakeup
          Traceback (most recent call last):
            File "<stdin>", line 1, in <module>
          AttributeError: 'ID' object has no attribute 'ID'
          >>> ID_0.get_info
          <bound_method>
          >>> print(ID_0.get_info)
          <bound_method>
          >>> print(ID_0.get_info())
          True
          >>> print(ID_0.wakeup())
          True
          >>> print(ID_0.read_output())
          Traceback (most recent call last):
            File "<stdin>", line 1, in <module>
          TypeError: function takes 5 positional arguments but 1 were given
          >>> print(ID_0.readConfigZone())
          True
          >>> print(ID_0.revisionnumber())
          Traceback (most recent call last):
            File "<stdin>", line 1, in <module>
          AttributeError: 'ID' object has no attribute 'revisionnumber'
          >>> print(ID_0.revisionNumber())
          Traceback (most recent call last):
            File "<stdin>", line 1, in <module>
          TypeError: 'bytearray' object isn't callable
          >>> print(ID_0.revisionNumber)
          bytearray(b'\x00\x00`\x02')
          >>> print(ID_0.serialNumber)
          bytearray(b'\x01#\xce\xa0\xcf\x06\x90\x0b\x01')
          >>> 
          

          Datalog dump from Thonny!

          UIFlow, so easy an adult can learn it!
          If I don't know it, be patient!
          I've ether not learned it or am too drunk to remember it!
          Author of the WIP UIFlow Handbook!
          M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

          ajb2k3A 1 Reply Last reply Reply Quote 0
          • ajb2k3A
            ajb2k3 @ajb2k3
            last edited by

            >>> print(ID_0.loadTempKey(64))
            True
            >>> print(ID_0.generatePublicKey())
            True
            >>> print(ID_0.publicKey64Bytes)
            bytearray(b'\x84\xf8\xda\xf6\xda\x18&r\x1b\xf0\xdbv\x1a\xcc\xf6z\xfd\xe2>\xdcY\xd5l\xf4kk\xb7D\xffI6\x1d\xcfDO\x9f\xc8bv\x80\xa9\xb8\xe75\xc5\x13\xe4\xe91\x9b\xcelg\xeb\x01Q\x18\xd0<\x91\xcb\xd8\xc1\xa1')
            >>> 
            

            Generate and display a key!

            UIFlow, so easy an adult can learn it!
            If I don't know it, be patient!
            I've ether not learned it or am too drunk to remember it!
            Author of the WIP UIFlow Handbook!
            M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

            1 Reply Last reply Reply Quote 0
            • ajb2k3A
              ajb2k3
              last edited by

              And a guide:
              https://www.hackster.io/AJB2K3/accessing-the-atecc608b-in-uiflow-part-1-5ac679

              UIFlow, so easy an adult can learn it!
              If I don't know it, be patient!
              I've ether not learned it or am too drunk to remember it!
              Author of the WIP UIFlow Handbook!
              M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

              1 Reply Last reply Reply Quote 0
              • felmueF
                felmue
                last edited by

                Hello @ajb2k3

                thank you for putting together the guide. Unfortunately I cannot get it to work. I do not fully understand the following instructions from your guide.

                Now I have the basics after poking away at micropython I import machine and units._ID0

                import units
                from units import _ID
                ID_0 = unit.get(unit.ID, (21,22))
                

                Using Thonny and ...
                ... trying to import units._ID0 results in an error.
                ... where is _ID used?
                ... trying to run ID_0 = unit.get(unit.ID, (21,22)) still crashes my M5Core2.

                Thanks
                Felix

                GPIO translation table M5Stack / M5Core2
                Information about various M5Stack products.
                Code examples

                ajb2k3A 1 Reply Last reply Reply Quote 0
                • ajb2k3A
                  ajb2k3 @felmue
                  last edited by ajb2k3

                  @felmue It will.
                  You have to run the commands in that exact order or it will crash and restart!

                  If you run help('modules') in Thonny you will find the module units/_ID this took me house to work out.

                  _ID0 does not exist, the module is _ID

                  UIFlow, so easy an adult can learn it!
                  If I don't know it, be patient!
                  I've ether not learned it or am too drunk to remember it!
                  Author of the WIP UIFlow Handbook!
                  M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                  1 Reply Last reply Reply Quote 0
                  • felmueF
                    felmue
                    last edited by

                    Hello @ajb2k3

                    thank you. I appreciate all your help. Unfortunately for some reason I cannot get it to work on my side. Whatever steps I execute before, every time I try to execute ID_0 = unit.get(unit.ID, (21,22)) my M5Core2 crashes.

                    Thanks
                    Felix

                    GPIO translation table M5Stack / M5Core2
                    Information about various M5Stack products.
                    Code examples

                    ajb2k3A 1 Reply Last reply Reply Quote 0
                    • ajb2k3A
                      ajb2k3 @felmue
                      last edited by ajb2k3

                      @felmue Sorry, you need to import unit
                      Then import units then from units import _ID

                      also the code is

                      import units
                      import unit
                      from units import _ID
                      ID_0 = unit.get(unit.ID, (21,22))
                      

                      however you can also use:

                      import units
                      import unit
                      from units import _ID
                      ATECC = unit.get(unit.ID, (21,22))
                      

                      I don't know why both unit and units (with an S) must be called but they both do.

                      UIFlow, so easy an adult can learn it!
                      If I don't know it, be patient!
                      I've ether not learned it or am too drunk to remember it!
                      Author of the WIP UIFlow Handbook!
                      M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                      1 Reply Last reply Reply Quote 0
                      • felmueF
                        felmue
                        last edited by

                        Hello @ajb2k3

                        thank you again. I tried both your code sequences - still no luck. M5Core2 still reboots after the last command.

                        Which UIFlow firmware version is running on your M5Core2?

                        Thanks
                        Felix

                        GPIO translation table M5Stack / M5Core2
                        Information about various M5Stack products.
                        Code examples

                        ajb2k3A 1 Reply Last reply Reply Quote 0
                        • ajb2k3A
                          ajb2k3 @felmue
                          last edited by ajb2k3

                          @felmue ok, its been working all day and now crashing
                          1.10.2

                          OK if you make 1 single mistake, you to to disconnect and power down the Core2 to empty the memory
                          0_1659898393874_Screenshot 2022-08-07 at 19.53.03.png

                          this works.

                          UIFlow, so easy an adult can learn it!
                          If I don't know it, be patient!
                          I've ether not learned it or am too drunk to remember it!
                          Author of the WIP UIFlow Handbook!
                          M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                          1 Reply Last reply Reply Quote 0
                          • felmueF
                            felmue
                            last edited by

                            Hello @ajb2k3

                            at this point I think whether the commands succeed or result in a crash depends on the amount of free memory.
                            With a freshly rebooted M5Core2 the following commands (sometimes) can be executed w/o crash.

                            >>> import unit
                            >>> ID_0 = unit.get(unit.ID, (21,22))
                            >>> print(ID_0.wakeup())
                            True
                            >>> print(ID_0.readConfigZone())
                            Traceback (most recent call last):
                              File "<stdin>", line 1, in <module>
                              File "units/_ID.py", line 186, in readConfigZone
                              File "units/_ID.py", line 363, in read
                              File "units/_ID.py", line 377, in read_output
                              File "units/_ID.py", line 161, in idle_mode
                              File "i2c_bus.py", line 100, in write_list
                            OSError: I2C bus error (110)
                            >>> print(ID_0.readConfigZone())
                            True
                            >>> print(ID_0.revisionNumber)
                            bytearray(b'\x00\x00`\x03')
                            

                            Note: The commands need to be executed manually one by one.
                            Note: I don't need the import units nor the from units import _ID commands.

                            Thanks
                            Felix

                            GPIO translation table M5Stack / M5Core2
                            Information about various M5Stack products.
                            Code examples

                            ajb2k3A 1 Reply Last reply Reply Quote 0
                            • ajb2k3A
                              ajb2k3 @felmue
                              last edited by

                              @felmue said in Edukit ATECC608B & AWS IOT & UiFlow:

                              Hello @ajb2k3

                              at this point I think whether the commands succeed or result in a crash depends on the amount of free memory.
                              With a freshly rebooted M5Core2 the following commands (sometimes) can be executed w/o crash.

                              >>> import unit
                              >>> ID_0 = unit.get(unit.ID, (21,22))
                              >>> print(ID_0.wakeup())
                              True
                              >>> print(ID_0.readConfigZone())
                              Traceback (most recent call last):
                                File "<stdin>", line 1, in <module>
                                File "units/_ID.py", line 186, in readConfigZone
                                File "units/_ID.py", line 363, in read
                                File "units/_ID.py", line 377, in read_output
                                File "units/_ID.py", line 161, in idle_mode
                                File "i2c_bus.py", line 100, in write_list
                              OSError: I2C bus error (110)
                              >>> print(ID_0.readConfigZone())
                              True
                              >>> print(ID_0.revisionNumber)
                              bytearray(b'\x00\x00`\x03')
                              

                              Note: The commands need to be executed manually one by one.
                              Note: I don't need the import units nor the from units import _ID commands.

                              Thanks
                              Felix
                              Agreed, once the error occurs then memory gets filled requiring hard reset.
                              You didn’t need unit or the from? I will try again later.
                              I have spent all weekend writing up the atecc for my av2 book including logging the MP modules. I’ll try without those two line tonight.

                              UIFlow, so easy an adult can learn it!
                              If I don't know it, be patient!
                              I've ether not learned it or am too drunk to remember it!
                              Author of the WIP UIFlow Handbook!
                              M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                              1 Reply Last reply Reply Quote 0
                              • ajb2k3A
                                ajb2k3
                                last edited by

                                The issue of found was that the basic unit functions are in the unit module with unit.ID being empty but the ATecc function are all in units._ID

                                UIFlow, so easy an adult can learn it!
                                If I don't know it, be patient!
                                I've ether not learned it or am too drunk to remember it!
                                Author of the WIP UIFlow Handbook!
                                M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                                1 Reply Last reply Reply Quote 0
                                • ajb2k3A
                                  ajb2k3
                                  last edited by ajb2k3

                                  @felmue try adding the following before defining ID_0

                                  From esp import gc
                                  gc.collect.

                                  This should help clean up some memory.

                                  Nope that was wrong. the min code I can get running is

                                  import unit
                                  import units
                                  from units import _ID
                                  import gc
                                  ATECC = unit.get(unit.ID, (21,22))
                                  gc.collect()
                                  

                                  Oh cool, I got import units._ID to work.

                                  UIFlow, so easy an adult can learn it!
                                  If I don't know it, be patient!
                                  I've ether not learned it or am too drunk to remember it!
                                  Author of the WIP UIFlow Handbook!
                                  M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                                  1 Reply Last reply Reply Quote 0
                                  • ajb2k3A
                                    ajb2k3
                                    last edited by

                                    @gabrielgc75 @felmue I now present to you the configuration loaded from the ATECC608b in my Core2 AWS
                                    0_1660068336244_Screenshot 2022-08-09 at 19.02.56.png

                                    UIFlow, so easy an adult can learn it!
                                    If I don't know it, be patient!
                                    I've ether not learned it or am too drunk to remember it!
                                    Author of the WIP UIFlow Handbook!
                                    M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                                    1 Reply Last reply Reply Quote 0
                                    • felmueF
                                      felmue
                                      last edited by

                                      Hello @ajb2k3

                                      thank you. I've tried to add the gc.collect() command. The result is still not 100% persistent. From time to time I still get a crash.

                                      Thanks
                                      Felix

                                      GPIO translation table M5Stack / M5Core2
                                      Information about various M5Stack products.
                                      Code examples

                                      ajb2k3A 1 Reply Last reply Reply Quote 0
                                      • ajb2k3A
                                        ajb2k3 @felmue
                                        last edited by

                                        @felmue thanks for letting me know. It’s been stable for the testing but I’m yet to move beyond. I tried looking at provisioning for vets and codes but my brain is not taking it in hence the low level MP stuff.

                                        I’m sure there will s an issue with MP but I don’t deal directly and not getting feedback from @m5stack or @IAMLIUBO

                                        UIFlow, so easy an adult can learn it!
                                        If I don't know it, be patient!
                                        I've ether not learned it or am too drunk to remember it!
                                        Author of the WIP UIFlow Handbook!
                                        M5Black, Go, Stick, Core2, and so much more it cant be fit in here!

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post