how to connect to M5stack PoESP32
-
Using arduino ide how can I connect to the device without usb port? Is there a serial to usb adapter? Or another method such as bluetooth, ethernet or wireless?
-
Hello @xha1e
PoESP32 is a unit and meant to be controlled via Groove serial connection using AT commands.
May I ask what is the reason you'd like to modify the preinstalled AT firmware?
That said, if you look at the schematic you'll see J2 (Download Socket) in the bottom right corner. J2 can be used with an USB serial adapter to modify the preinstalled AT firmware.
Note: J2 is internal and not populated.
Note: the preinstalled internal firmware can be altered / replaced using Arduino IDE. But please be aware that restoring the preinstalled AT firmware requires the ESP-IDF build environment (which is different from the Arduino IDE). Preinstalled AT firmware source code and build instructions can be found here.Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login