M5Core 2 and M5Core 3 will not light display
-
M5Basic runs sketches and sprites well connected to my MacBook Air (OS14.1.2). Using same setup and cable to two new M5Core2's and a M5Core3 will not even light the display, even after after pushing power and reset buttons. Core-specific libraries are loaded, Core 2-specific sketches tested, wch...serial port selected, and appropriate boards are selected, both Mac drivers are loaded.. What am I doing wrong?
Thanks much, -
Do they work if you write the UIFlow firmwares to them using M5Burner?
Are you programs actually supposed to display things on screen?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login