example Atom_TFCard program working but lots gpio_set_level(227) errors

gtmans

I just loaded the sample program Atom_TFCard program in a brand new Atom-light with TFCard module. The program works OK but there are hundreds of unwanted messages in the logging. What can I do to suppress these in Arduino IDE:

09:36:35.622 -> E (23934) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.622 -> E (23935) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.622 -> E (23938) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.622 -> E (23945) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.622 -> E (23950) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.622 -> E (23955) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23961) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23967) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23972) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23978) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23984) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23990) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (23995) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.656 -> E (24001) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.690 -> E (24006) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.690 -> E (24012) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.690 -> E (24018) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.690 -> E (24024) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.690 -> E (24029) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.690 -> E (24034) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.724 -> E (24040) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.724 -> E (24046) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.724 -> E (24051) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.724 -> E (24057) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.724 -> E (24063) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.724 -> E (24068) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.758 -> Total space: 29542MB
09:36:35.758 -> E (24084) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.758 -> E (24084) gpio: gpio_set_level(227): GPIO output gpio_num error
09:36:35.758 -> Used space: 1MB

Sebastien

@gtmans
I received my card reader today and same problem for me. My card is 16GB

/dev/sdc1 on /media/seb/D10A-C178 type vfat

I tried to re-format the sdcard with vfat32, same issue.

Sebastien

I created an official issue there:
https://github.com/m5stack/M5Atom/issues/87