4. Unit-Synth: question on MIDI_IN

Unit-Synth: question on MIDI_IN

  • M

    This device has a Grove input jack. The Grove specification states that most Grove devices will accept either 3.3v or 5v for the signal input. The signal input in question is MIDI_IN.

    I would like to know if MIDI_IN will work with the MIDI standard of 5v without damaging the device.

    0

  • Hello @mcolan

    according to the SAM2695 datasheet used in Unit-Synth MIDI_IN is a 5 V tolerant input.

    Thanks
    Felix

    0