Unable to request HTTPS endpoint with LAN Module 13.2

[msauv]

General informations :

• M5Stack Core 2
• LAN Module 13.2
• Using PlatformIO with platform=platformio/espressif32@^6.9.0 & board=m5stack-core2
• M5Stack powered by USB-C

Problem :
I need to make requests to a secure HTTPS server. They work perfectly on WiFi with the “WiFiClientSecure” client and the “WiFiClient” + “SSLClientESP32” client, but not with “EthernetClient” of “M5Module_LAN” or “Ethernet” + “SSLClientESP32”.

I've tried many modules and libraries without getting HTTPS to work, HTTP works in ethernet but is completely useless and outdated. Do you know a way to solve this problem? It shouldn't be so complicated to connect to a site using TLS in 2024.

Here are some sample codes I've tried :

#include <WiFi.h>
#include <WiFiClientSecure.h>
#include <HTTPClientGeneric.h>
#include <SPI.h>

char ssid[] = "ssid";
char pass[] = "password";

WiFiClientSecure wifi;

void setup()
{
 Serial.begin(115200);
 WiFi.begin(ssid, pass);
 uint16_t timeout = 0;
 while (WiFi.status() != WL_CONNECTED)
 {
   if (timeout > 600)
   {
     Serial.println(" Timeout reached, aborting");
   }
   delay(100);
   Serial.print(".");
   timeout++;
 }
 Serial.println(" Connection established!");
 Serial.println("Network::connectWifi(): IP address   : " + WiFi.localIP().toString());
 Serial.println("Network::connectWifi(): Subnet mask  : " + WiFi.subnetMask().toString());
 Serial.println("Network::connectWifi(): Gateway IP   : " + WiFi.gatewayIP().toString());
 Serial.println("Network::connectWifi(): DNS          : " + WiFi.dnsIP().toString());
 Serial.println("Network::connectWifi(): SSID         : " + WiFi.SSID());
 Serial.println("Network::connectWifi(): Signal       : " + String(WiFi.RSSI()) + " dBm");
 wifi.setInsecure(); // Just trying to connect, will use certificate later
}

void loop()
{
 HTTPClientGeneric https;
 https.begin(wifi, " [URL of my HTTPS endpoint] ");
 int httpCode = https.GET();
 Serial.print("GET Status code: ");
 Serial.println(httpCode);
 String response = https.getString();
 Serial.println("Response:");
 Serial.println(response);
 delay(5000);
}

This one works perfectly, the local IP and the response are displayed in the serial port.

#include <WiFi.h>
#include <WiFiClient.h>
#include <HTTPClientGeneric.h>
#include <SSLClientESP32.h>
#include <SPI.h>

char ssid[] = "ssid";
char pass[] = "password";

const char *isrg_root_ca = "-----BEGIN CERTIFICATE-----\n"
                           "...\n"
                           "-----END CERTIFICATE-----\n";

WiFiClient wifi;
SSLClientESP32 ssl_client(&wifi);

void setup()
{
  Serial.begin(115200);
  WiFi.begin(ssid, pass);
  uint16_t timeout = 0;
  while (WiFi.status() != WL_CONNECTED)
  {
    if (timeout > 600)
    {
      Serial.println(" Timeout reached, aborting");
    }
    delay(100);
    Serial.print(".");
    timeout++;
  }
  Serial.println(" Connection established!");
  Serial.println("Network::connectWifi(): IP address   : " + WiFi.localIP().toString());
  Serial.println("Network::connectWifi(): Subnet mask  : " + WiFi.subnetMask().toString());
  Serial.println("Network::connectWifi(): Gateway IP   : " + WiFi.gatewayIP().toString());
  Serial.println("Network::connectWifi(): DNS          : " + WiFi.dnsIP().toString());
  Serial.println("Network::connectWifi(): SSID         : " + WiFi.SSID());
  Serial.println("Network::connectWifi(): Signal       : " + String(WiFi.RSSI()) + " dBm");
  ssl_client.setCACert(isrg_root_ca);
  ssl_client.setInsecure(); // Same
}

void loop()
{
  HTTPClientGeneric https;
  https.begin(ssl_client, " [URL of my HTTPS endpoint] ");
  int httpCode = https.GET();
  Serial.print("GET Status code: ");
  Serial.println(httpCode);
  String response = https.getString();
  Serial.println("Response:");
  Serial.println(response);
  delay(5000);
}

This one works perfectly, the local IP and the response are displayed in the serial port.

#include <M5Unified.h>
#include <M5Module_LAN.h>
#include <WifiClient.h>

#include <HTTPClientGeneric.h>
#include <SSLClientESP32.h>
#include <SPI.h>

byte mac[] = (mac);
Client *client;
EthernetClient ethClient;
SSLClientESP32 ssl_client(&ethClient);

void setup()
{
  M5.begin();
  Serial.begin(115200);
  M5Module_LAN LAN;

  uint8_t cs_pin;
  uint8_t rst_pin;
  uint8_t int_pin;

  m5::board_t board = M5.getBoard();
  switch (board)
  {
  case m5::board_t::board_M5Stack:
  {
    cs_pin = 5;
    rst_pin = 0;
    int_pin = 35;
  }
  break;
  case m5::board_t::board_M5StackCore2:
  {
    cs_pin = 33;
    rst_pin = 0;
    int_pin = 35;
  }
  break;
  case m5::board_t::board_M5StackCoreS3:
  {
    cs_pin = 1;
    rst_pin = 0;
    int_pin = 10;
  }
  break;
  }

  SPI.begin(SCK, MISO, MOSI, -1);

  LAN.setResetPin(rst_pin);
  LAN.reset();
  LAN.init(cs_pin);

  while (LAN.begin(mac) != 1)
  {
    Serial.println("Error getting IP address via DHCP, trying again...");
    delay(2000);
  }
  Serial.println(" Connection established!");
  Serial.println("Network::connectWifi(): IP address   : " + LAN.localIP().toString());
  Serial.println("Network::connectWifi(): Subnet mask  : " + LAN.subnetMask().toString());
  Serial.println("Network::connectWifi(): Gateway IP   : " + LAN.gatewayIP().toString());
  Serial.println("Network::connectWifi(): DNS          : " + LAN.dnsServerIP().toString());
  ssl_client.setCACert(isrg_root_ca);
}

void loop()
{
  HTTPClientGeneric https;
  https.begin(ssl_client, " [URL of my HTTPS endpoint] ");
  int httpCode = https.GET();
  Serial.print("GET Status code: ");
  Serial.println(httpCode);
  String response = https.getString();
  Serial.println("Response:");
  Serial.println(response);
  delay(5000);
}

It does not work with the following error:

[ 20591][E][ssl_lib_client.cpp:35] _handle_error(): [start_ssl_client():300]: (-1) ERROR - Generic error
[ 20601][E][SSLClientESP32.cpp:123] connect(): start_ssl_client: -1
[ 21775][E][ssl_lib_client.cpp:35] _handle_error(): [start_ssl_client():300]: (-1) ERROR - Generic error
[ 21784][E][SSLClientESP32.cpp:123] connect(): start_ssl_client: -1

Note that the IP is displayed correctly. It works with the EthernetClient but the request is HTTP only, so not what I want.

[felmue]

Hello @msauv

have you looked at this example from the ESP_SSLClient library? Works for me.

Thanks
Felix

[msauv]

@felmue Thanks it works perfectly with the "ESP_SSLClient" module instead of "SSLClientESP32" !