Driver Windows for M5 Stickc Plus2
-
Hello.
I installed the driver CH9102_VCP_SER_Windows https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_SER_Windows.exe . But when connected via USB - Type C cable, my device is not displayed in the device manager. There are no COM ports in M5Burner (they are not displayed).Please, help me
OS: Windows 11
M5Stack Stickc Plus 2 -
@mrconstantine have you fully shutdown your windows computer and cold booted it from a powered off state?
Have you tried a different usb cable?
-
@ajb2k3 Yes, I rebooted the laptop with the Windows operating system. It did not help. I did not try another USB cable.
And what are the characteristics of the USB cable? What should the cable be?
-
Thank you!
I connected the device with another USB cable. Now the COM port is displayed and the device is visible -
@mrconstantine in most cases it’s bad cables. When buying them make sure to get data cables as power/charge cables don’t have the data wires
-
I installed this driver on the Mac M1, but I had a connection problem that I didn't have before, I uninstalled it.
Now I can't connect the m5 to the USB like before, can you help me, because it only opens the console port, bluetouch, and debug!!thanks in advance!
-
@dmarinho Is it blocked by OSX security system?
Have you checked cables?
Did you reboot the Mac after installing the driver and before connecting the Stick?
Mac have been doing some strange things with security of late.
