🤖Have you ever tried Chat.M5Stack.com before asking??😎
    M5Stack Community
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    my m5 stick c plus 2 is not working

    M5 Stick/StickC
    3
    3
    324
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • K
      kubeqq
      last edited by

      i have a problem where i try to turn on my M5 StickC Plus 2 and the screen is on while im pressing the pwr button but its not showing any thing and the green lamp an the side is on but if i take a finger from the pwr button the screen and the lamp is off i just get the m5 stick and dont knew what to do

      kurikoK 1 Reply Last reply Reply Quote 0
      • kurikoK
        kuriko @kubeqq
        last edited by

        @kubeqq
        Please follow this instruction and see if helps:

        1. Observe whether there are any obvious physical damage marks on the device.
        2. Install the device driver:
          1. Windows: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_SER_Windows.exe
          2. macOS: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_MacOS_v1.7.zip
        3. Connect the device using a USB cable and open the device manager. Check whether the device manager page refreshes when the device is inserted, and whether a new device appears in Universal Serial Bus controllers. If not:
          1. If you are using USB C to C cable: First disconnect the StickCPlus2, turn off the device, and then plug in the cable (press and hold the power button until the green light turns on to indicate that it is turned off). Or replace it with an A to C cable.
          2. If you are using USB A to C cable: "Try to change the data cable", "Try to reinstall the driver", "Try to change the PC".
        4. Reburn the factory firmware: https://docs.m5stack.com/en/guide/restore_factory/m5stickc_plus2.
        5. The screen is still black after burning:
          1. Press and hold the leftmost button until the green light inside turns on, then plug in the USB cable
          2. Observe whether the screen is black but has a faint backlight, and whether there is a beep sound when pressing the button

        Good morning, and welcome to the Black Mesa Transit System.

        1 Reply Last reply Reply Quote 0
        • robskiR
          robski
          last edited by

          for start install M5Burner,
          connect your M5StickCP2 via usb to pc/laptop and observe if it will detect com port,
          from M5Burner you can then load latest firmware for your device.

          M5StickC, M5StickCPlus, M5StickCplus2,M5GO, M5Core, M5Tough, M5Core2, M5 Demo Board, M5Dial, M5Paper, M5Atom, M5Cardputer, M5StampS3, CoreMP135, StamPLC, AirQ

          1 Reply Last reply Reply Quote 0
          • First post
            Last post