Battery charging does not work on BASIC V2.7
-
BASIC V2.7 does not charge with approx. 500mA.
Not with the original battery, which is plugged into the back and also not at the connector directly on the PCB.
With the BASIC V2.4 it charges fine with 500mA. I have also tested 800mA via the FW.I tested the factory image and also my own FW. It works on one, but not on the other.
In addition, the V2.4 does not work with the bottom battery (with switch) of the V2.7.
All very strange.
I need help :| -
-
I measured the voltage of the ‘5V pin’.
With the V2.4 I get 5 V,
with the V2.7 only 4.7V.Could this be the reason why it only charges with a maximum of 150 to 200mA?
How can I increase the voltage output of the IP5306?
Is this possible via i2c?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login